Triband GNSS RTK Breakout - GNSS receiver with UM980 module
ID: 1188935
5902186319325
zł1,586.21
Tax included
zł1,289.60 tax excl.
GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286
Description
The GNSS receiver based on the renowned UM980 module from Unicore Communications is a real innovation in the field of precise positioning. Thanks to Nebulas IV technology, this advanced module can track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS. In addition, it offers location accuracy that reaches an impressive 8 mm in the horizontal plane and 15 mm in the vertical plane. Supports NMEA, RTCM and Unicore protocols via UART interface.
The UM980 module is not only extremely precise - it is also extremely versatile. It offers the ability to act as both a base station and a workstation, which makes it an ideal solution for a wide range of applications, from advanced navigation systems to precision machines and measuring devices. And that's not all. The built-in battery in the receiver allows you to save key configuration data and satellite information, which significantly speeds up the location process. Connectors such as USB Type C or 4-pin JST connector guarantee easy integration with various systems and devices. Additionally, thanks to the SMA connector, the module is ready to work with professional GNSS antennas.
The user also has full control over the functionality of the module thanks to built-in jumpers and configuration options regarding power supply and LEDs. If you are looking for a reliable, advanced and precise solution for locating in demanding conditions, Triband GNSS RTK Breakout with the UM980 module will be the perfect choice for you.
Features
- 1408-channel GNSS receiver based on Nebulas IV
- Simultaneous support of the following systems: GPS, GLONASS, Galileo, BeiDou, QZSS
- GPS: L1C/A, L1C, L2P(Y), L2C, L5
- GLONASS: L1, L2
- Galileo: E1, E5a, E5b, E6
- Beidou: B1I, B2I, B3I, B1C, B2a, B2b
- QZSS: L1, L2, L5
- SBAS
- Horizontal Accuracy:
- Autonomous: 1.5 m
- DGPS: 0.4 m
- RTK: 0.8 cm + 1 ppm
- Vertical accuracy
- Autonomous: 2.5 m
- DGPS: 0.8 m
- RTK: 1.5 cm + 1 ppm
- Data update rate: 50 Hz
- Time until first data update:
- Cold start: 30 sec
- Warm start: 20 sec
- Hot start: 5 sec
- Maximum altitude: 18000 m
- Max G: <5G
- Maximum speed: 515 m/s
- Speed accuracy (RMS): 0.03 m/s
- Time accuracy (RMS): 20 ns
- Supports NMEA, RTCM and Unicore protocols via UART
- Integrated SMA connector for use with your selected multi-band GNSS antenna
- Voltage: 5V or 3.3V (3.3V logic)
- USB Type-C connector
- ESD protection diodes for USB data lines
- Built-in resettable PTC fuse 6V/1.5A
- USB-URT converter CH340 on the UART1 port
- JST connector for UART2 port
- BlueSMiRF for UART3 port
- Maintenance battery
- LEDs
- PWR: power indicator
- PVT: position, voltage, time
- PPS: Pulses per second rate
- RTK: an indicator of the reaction time and kinematics of a solid solution
- Configuration jumpers:
- SHLD: USB Shield
- VSEL: Voltage selection for blocking the JST connector port
- PWR: Power LED
- PVT: Position, voltage, LED time
- PPS: LED indicating pulses per second
- RTK: Real-time kinematic LED
- BT-VCC: Selects the voltage for the Bluetooth port
- VANT: Voltage antenna selection
- Dimensions: 50.8 x 50.8 mm
- Weight: 13.8 g
1188935
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 1m, white
zł7.24
Delivery date unknown
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
zł7.06
Delivery date unknown
No product available!
GNSS antenna SPK6618H enabling tri-band reception (L1/L2/L5) for GPS, GLONASS, Galileo and BeiDou constellations. It uses a 5/8 inch 11TPI thread found in high-end antennas and surveying equipment. SparkFun GPS-21801
zł695.39
Delivery date unknown
No product available!
Other products in the same category (16)
GNSS receiver to receive navigation signals from satellite navigation systems such as GPS and BeiDou. It offers positioning accuracy of up to 2 m. DFRobot TEL0157
zł85.98
24h
Available quantity: 1
Available
LC76G GNSS receiver module. It can receive data from GPS, GLONASS, Galileo, BDS and QZSS systems. It uses a UART or I2C interface and offers an accuracy of up to 1.5m. Waveshare LC76G GNSS Module
zł62.51
24h
Available quantity: 6
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł107.82
24h
Available quantity: 5
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 4
Available
GPS module with SAM-M10Q GNSS receiver. The chip can receive data from all major positioning systems: GPS, GLONASS, Galileo, QZSS and BeiDou. It has derived UART and I2C interfaces. SparkFun GPS-21834
zł299.00
24h
Available quantity: 1
Available
The SparkFun RTK reference station is ideal for precise geolocation, measurement and time reference. It makes it extremely easy to set up a fixed-location NTRIP server, providing an RTK system and even to work as an NTP server. SparkFun GPS-22429
zł3,829.00
3 weeks
No product available!
GPS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-22660
zł1,629.06
3 weeks
No product available!
A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560
zł2,099.00
3 weeks
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports positioning assistance systems (WAAS, EGNOS, MSAS and GAGAN) and EASY technology. Waveshare LC29H(AA) GPS HAT
zł200.24
4 weeks
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports fast, dual-band RTK positioning. Waveshare LC29H(DA) GPS/RTK HAT
zł289.97
4 weeks
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports the RTK function as a base station. Waveshare LC29H(BS) GPS/RTK HAT
zł294.71
4 weeks
No product available!
A geolocation and measurement device that allows measurement with an accuracy of centimeters. It can operate in "rover" mode with RTK support or as a base station. It uses the ESP32 module and Bluetooth communication as well as the advanced ZED-F9P GPS module. SparkFun GPS-19984
zł3,773.41
3 weeks
No product available!
GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-22693
zł1,565.65
3 weeks
No product available!
GNSS module based on the mosaic-X5 system from Septentrio. This compact GNSS receiver delivers centimeter-level accuracy with high data update rates. It supports multiple satellite constellations including GPS (US), GLONASS (Russia), Beidou (China), Galileo (Europe) and NavIC (India), as well as regional systems such as SBAS and QZSS. SparkFun GPS-23088
zł3,768.95
3 weeks
No product available!
Compact GPS locator in the shape of a credit card. Equipped with GPS, Bluetooth and Wi-Fi, it ensures smooth positioning both indoors and outdoors. It not only offers location tracking, but also monitors parameters such as temperature, brightness and movement. Seeed Studio 114993073
zł192.38
24h
Available quantity: 3
Available
GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-21305
zł1,799.00
3 weeks
No product available!
GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286