- Out-of-Stock
KAmodRPI RS485 CAN HAT - CAN and RS485 module for Raspberry Pi
ID: 581674
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
Our offer includes a newer version of the module under the name:
KAmodRPI RS485 CAN HAT - CAN and RS485 module for Raspberry Pi
Description
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks. The module is compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B+ / 400 boards. The CAN interface is supported by the MCP2515 and MCP2551, and the RS485 by the ST3485 IC.
Attention!
The Raspberry Pi Zero computer seen in the pictures is not included in the set, it must be purchased separately.
Properties
- Compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B+ / 400
- CAN bus, built-in CAN controller MCP2515 via SPI interface, with MCP2551 transceiver
- RS485 function, controlled by UART, half-duplex communication, with ST3485 transceiver
- Integrated 3,3V stabilizer, operating voltage 5V
- CAN controller: MCP2515
- CAN Transceiver: MCP2551
- RS485 transmitter: ST3485
- Integrated bus status LED's
- Dimensions: 65 x 30 mm
Included
- RS485 CAN HAT module
- Kit for screwing the hat to the Raspberry board
581674
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 85
Available
TTL - RS485 converter 5V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.
zł16.64
24h
Available quantity: 204
Available
TTL - RS485 converter 3,3V. RS485 interface on 5.08mm screw terminal and 2.54mm pitch connector.
zł17.81
24h
Available quantity: 169
Available
Raspberry Pi computer built into the keyboard. It is equipped with a 1.8 GHz quad-core ARM Cortex-A72 processor and 4 GB DRAM. Raspberry Pi 400
zł336.90
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Neodymium rectangular magnet with dimensions of 20x5mm a and a height of 2 mm.
Retired
No product available!
Permanent cylindrical neodymium magnet with a diameter of 8 mm and a height of 3 mm.
Retired
No product available!
No product available!
No product available!
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1501
Retired
No product available!
No product available!
The special construction of the braid facilitates installation in all conditions. z28421
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Benoit Cushman-Roisin, Jean-Marie Beckers
Delivery date unknown
No product available!
Male terminal block, angled, 2-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.