.png)
- Out-of-Stock
Aluminum enclosure PI4-CASE-E for Raspberry Pi 4 (black) - Waveshare 17802
ID: 586655
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. Waveshare PI4-CASE-E
Description
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. It is characterized by a low profile, thanks to which it takes up little more space than the minicomputer itself. The technological process of oxidation sandblasting ensures a nice look and a pleasant-to-touch surface. At the bottom of the housing there are four non-slip rubber feet, and precise cutouts guarantee access to all minicomputer sockets.
Features
- Compatible with Raspberry Pi 4 model B
- It serves as a heat sink
- Non-slip feet
- Material: aluminum
- Black colour
Kit contains
- 2 x case part
- Thick thermal tape
- Thin thermally conductive tape
- Acrylic side panel
- 4 x rubber feet
- 4 x copper distance
- 4 x black screw
- Key
Assembly instruction
586655
Data sheet
- Compatible with
- Raspberry Pi 4 B
- Montage
- Brak
- Access to GPIO
- Yes
- Assembly
- screws
- Włącznik
- Nie
- Houses camera
- No
- Fan
- without fan bracket
- Houses screen
- without screen bracket
- Colour
- Black
- Materiał
- Aluminum
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł339.54
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 144
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 146
Available
Other products in the same category (16)
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
Retired
No product available!
LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK
Retired
No product available!
The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK
Retired
No product available!
Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3
Retired
No product available!
Wired mouse with a precise optical sensor. It has a button to change the resolution in four levels: 800/1200/1600/2400 DPI. 1.8m cable with USB plug. Natec NMY-0667
Retired
No product available!
Easy PET-G filament in black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Black
Retired
No product available!
Easy PET-G filament in pure transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Pure Transparent
Retired
No product available!
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
Retired
No product available!
Easy PET-G filament in white with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G White
Retired
No product available!
Easy PLA filament in graphite, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Graphite
Retired
No product available!
Easy PLA filament in gray, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Gray
Retired
No product available!
Easy PLA filament in inox, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Inox
Retired
No product available!
Easy PLA filament in red, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Red
Retired
No product available!
Easy PLA filament in Vertigo, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Vertigo
Retired
No product available!
Easy PLA filament in white, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA White
Retired
No product available!
Easy PLA filament in yellow, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Yellow
Retired
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. Waveshare PI4-CASE-E