- Out-of-Stock
GNSS module based on L76B and designed to work with Raspberry Pi Pico. It can work with GPS, BDS and QZSS systems and provides high positioning accuracy with low power consumption. It communicates via the UART interface. On the board there is a socket for a battery supporting the voltage and 4 LEDs indicating the operation. The module is powered with the voltage of 5 V. Full documentation with examples is available on the product Wiki page.


Manufacturer
Responsible person
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
Magnetic pad dedicated to 3D printing. It has dimensions of 235x235 mm and is covered with a PEI coating on one side
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 200 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2202C
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 150 MHz band, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1152E
No product available!
Industrial RS485 - Ethernet converter. It is equipped with PoE function and is DIN-rail mounted. Waveshare RS485 TO POE ETH (LF)
No product available!
10.3" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1872×1404 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-103B (EU)
No product available!
9.7" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1200x825 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-97 (EU)
No product available!
Multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module that supports R15 5G NSA/SA data transfer up to 2.4Gbps. It features UART, PCIe, USB3.1 and GPIO interfaces. Waveshare SIM8200EA-M2
No product available!
A portable gaming console based on the Raspberry Pi Zero, featuring a 2" IPS LCD display and speaker. Waveshare GamePi20 Acce
No product available!
High-power dual power supply module based on LT1083CP voltage regulators. It has an adjustable output voltage from 1.25 to 48 V DC and an output current of up to 10 A. It provides power for both channels in stereo audio amplifiers
No product available!
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 5600 V. The probe has two attenuation factors: 200X and 2000X. Micsig DP20003
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 100 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP1003
No product available!
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B