Crowtail-MP3 Player 2.0 – MP3/WAV/WMA audio-player module, UART, microSD, 3.5 mm jack, 5 V
ID: 1201668
5902186331785
zł24.97
Tax included
zł20.30 tax excl.
Crowtail-MP3 Player 2.0 is a universal audio module with MP3/WAV/WMA playback, microSD card support and a UART interface. Intended for projects requiring the playback of voice messages, sound effects or music.
Description
Crowtail-MP3 Player 2.0 is a compact audio-player module with a UART interface and Crowtail connector, intended for integration in electronic projects requiring sound generation. It supports MP3, WAV and WMA audio files stored on microSD cards up to 32 GB with FAT16 or FAT32 file systems. The board includes a 3.5 mm jack connector and a microSD slot. The module is based on the KT403A chip, offering a 24-bit DAC with 90 dB dynamic range and 85 dB signal-to-noise ratio. Playback (sequential or random) can be controlled using AT commands sent via UART.
Properties
- Crowtail connector – UART
- Supply voltage: 5 V DC
- Current consumption (idle): <15 mA
- Typical current consumption: <40 mA
- Chip: KT403A
- LDO output voltage: 3.3 V
- Maximum chip output current: 100 mA
- Supported audio formats: MP3, WAV, WMA
- Supported file systems: FAT16, FAT32
- Supported microSD card: up to 32 GB
- Sampling rates: 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 kHz
- Audio output: 3.5 mm jack
- DAC: 24-bit, 90 dB dynamic range, 85 dB SNR
- Built-in 10-level EQ
- Dimensions: 40.0 × 20.0 × 11.8 mm
Included
- Crowtail-MP3 Player x1
- Crowtail cable x1
1201668
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
MP3 panel with LCD display for installation in the audio device. It allows you to play files in MP3, WAV and WMA format from USB memory, SD card, via AUX and Bluetooth 5.0. Has a built-in FM receiver. modBluAud
zł26.92
4 weeks
No product available!
Audio module with DAC, headphone amplifier and display, designed to work with the Raspberry Pi. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM482
zł158.14
24h
Available quantity: 4
Available
Mini MP3 player with 128 MB built-in memory. It can work as a separate device and play sounds or be controlled via the UART serial interface. DFRobot DFR0768
zł41.89
4 weeks
No product available!
Qwiic Tsunami Super WAV Trigger - a module with a multi-channel WAV player
zł582.11
3 weeks
No product available!
WAV files player module. It is based on a DAC converter and an audio amplifier, there is a 3.5 mm audio output on the board. The files are played from the microSD card. Adafruit 94
zł163.39
24h
Available quantity: 1
Available
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21772
zł86.09
3 weeks
No product available!
WIG-12897WAV file player module controlled by UART interface or switching inputs. It is based on a 2 W audio amplifier. The board has a 3.5 mm audio output and a speaker connector. The files are played from the microSD card. SparkFun DEV-13660
zł296.95
24h
Available quantity: 1
Available
MP3 panel for installation in the audio device. It allows you to play files in MP3 format from a USB memory or a microSD card. It has a built-in 3.5mm Jack connector with an audio output
zł26.24
24h
Available quantity: 11
Available
Expansion module with stereo audio output equipped with LM4550 chip with AC\'97 codec. It allows you to play and record high-quality stereo sounds. Numato Lab EXPAUD003
zł176.59
3 weeks
No product available!
This breakout board, the ultimate companion for the VLSI VS1053B DSP codec chip, can decode a wide variety of audio formats MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM); it can be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. 8 GPIO pins can be used for lighting up small LEDs or reading buttons. Adafruit 1381
zł131.84
24h
Available quantity: 1
Available
Module with RP2040 microcontroller and digital I2S DAC converter and built-in 3W stereo amplifier, allowing to connect speakers to Raspberry Pi or computer via USB-C. Provides clear sound without the need of using 3.5 mm jack socket and offers easy connection of speakers via screw terminals without soldering. It is equipped with a connector for volume encoder and Qw/ST port for integration with other modules via I2C. Pimoroni PIM742
zł121.66
24h
Available quantity: 1
Available
Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)
zł51.17
4 weeks
No product available!
Audio module with DAC, amplifier, display and loudspeaker, designed to work with the Raspberry Pi. Pimoroni PIM485
zł156.70
24h
Available quantity: 3
Available
An audio module with a DAC converter designed to work with the Raspberry Pi. Supports I2S/DSD/Coaxial input, Analog/Coaxial/Optical/I2S output, and has 384K/32Bit decoding function. DFRobot DFR0941
zł352.97
4 weeks
No product available!
Module with a multi-channel WAV player. It allows you to mix 32 mono or 18 stereo tracks with the ability to connect to any MIDI controller. It has 8 mono or 4 stereo audio outputs. SparkFun WIG-18159
zł489.00
3 weeks
No product available!
Mini MP3 player with microSD card support. It can work as a separate device and play sounds from the card or be controlled via the UART serial interface.
zł10.20
24h
Available quantity: 18
Available
Crowtail-MP3 Player 2.0 is a universal audio module with MP3/WAV/WMA playback, microSD card support and a UART interface. Intended for projects requiring the playback of voice messages, sound effects or music.