- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Rogue Carrier - base board for NVIDIA Jetson AGX Xavier
ID: 577578
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
Description
The Connect Tech Rogue Carrier is the base board for NVIDIA Jetson AGX Xavier modules. The module offers four 4 Lane MIPI CSI-2 video inputs and 6 2 Lane MIPI CSI-2 inputs, NVMe M.2 Key M, two HDMI outputs, three USB 3.1 ports and two Ethernet (RJ-45) ports. The module is characterized by small dimensions and weight.
The NVIDIA Jetson AGX Xavier module is plugged into a dedicated connector from the bottom of the board. Thanks to this solution, the whole creates a compact and compact set ready for installation in the device.
Attention!
The kit does not include NVIDIA Jetson AGX Xavier modules. They must be purchased separately.Features
- Compatible with NVIDIA Jetson AGX Xavier
- 2 x Gigabit Ethernet (8p8c RJ-45)
- 1 port from the RYMII PHY controller
- 1 port from the PCIe PHY controller
- 2x HDMI 1.4a (Type-A vert RA)
- 6 x 2 Lane MIPI CSI-2
- 4 x 4 Lane MIPI CSI-2
- 1 x USB OTG (Micro-AB)
- 3 x USB 3.1 Ports (Type-C)
- 1 x Micro SD / UFS card slot
- 2 x NVMe M.2 Key M socket.
- 2 x 3.3V UART
- 1 x I2C
- 1 x SPI
- 2 x CAN 2.0b port
- 4-bit GPIO 3.3 V
- 1 x M.2 Key E socket with PCIe and USB (WiFi + BT modules)
- Power and reset buttons
- RTC battery 3-pin Picoblade connector
- 9-19 V DC power supply (Molex Mini-Fit Jr Header)
- Dimensions: 92 x 105 mm
- Weight: 103 g
Demonstration video
577578
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Module with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier 900-82888-0000-000.
zł7,527.94
Delivery date unknown
No product available!
Module with SoC system containing eight 64-bit ARM v8.2 cores and Volta graphic system consisting of 384 cores supporting CUDA, cuDNN and TensorRT technology. The system is supported by DDR4 RAM with a capacity of 8 GB, eMMC memory with a capacity of 32 GB. NVIDIA Jetson AGX Xavier 8GB 900-82888-0060-000.
zł5,270.30
Delivery date unknown
No product available!
Development kit with a processor featuring 12 ARM Cortex-A78AE v8.2 cores and an NVIDIA Ampere GPU comprising 2048 cores supporting CUDA technology. Nvidia 945-13730-0055-000
zł23,998.74
24h
Available quantity: 1
Available
Other products in the same category (16)
No product available!
iNEMO advanced inertial module: 3D accelerometer, 3D gyroscope and signal processor, LGA22, STM, RoHS
Retired
No product available!
No product available!
One-touch sensor module, illuminated with red diodes, with AT42QT1010, ERAmatic
Retired
No product available!
No product available!
No product available!
No product available!
The GL5537 Photoresistor is a high power, high-speed photosensitive element that changes its height based on scattered light, covering applications in a variety of applications such as automatic flashing, control, and photoelectric systems, with an ultimate flux of 150 VDC, a dissipation power of 100 mW, and an operating temperature range of -30°C to +70°C.
Retired
No product available!
MEMS and environmental sensor expansion board for STM32 Nucleo
Delivery date unknown
No product available!
No product available!
No product available!
No product available!
Electric tin extractor with 30W Velleman heater. It is equipped with a manual vacuum pump
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash memory, 128kB RAM, 100MHz, I2C, IrDA, LIN, MMC / SD / SDIO, SPI, UART / USART, USB OTG, Brown-out Detect / Reset, DMA, I2S, POR, PWM, WDT, 1.7 ... 3.6 V, A / D 16x12b, 48-UFQFPN
Retired
No product available!
No product available!
Precision screwdriver set 8pcs with a rotating cap, Velleman
Retired
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101