RA4M1-Zero (M) development board with 48 MHz microcontroller and pre-soldered headers - Waveshare 30662
ID: 1198941
5902186308589
zł34.56
Tax included
zł28.10 tax excl.
RA4M1-Zero-M is a compact development board based on the RA4M1 microcontroller, equipped with a USB Type-C connector, a range of peripheral interfaces, and software security features. Designed to work with the Arduino IDE and SMT environment, it is suitable for projects requiring small dimensions and advanced functionality.
Description
A miniature development board equipped with a Renesas RA4M1 microcontroller with an ARM Cortex-M4 core, clocked at 48 MHz. The integrated floating-point unit (FPU) enables more efficient processing of mathematical data. The chip offers 256 KB of Flash memory, 32 KB of SRAM, and 8 KB of EEPROM. Onboard features include a 14-bit ADC, a 12-bit DAC, a CAN bus controller, and a USB 2.0 interface. Thanks to support for firmware encryption, secure boot, and anti-tamper mechanisms, the board ensures an increased level of application security. Fully compatible with the Arduino IDE, which simplifies the prototyping process. The module, with compact dimensions of 18 × 23.5 mm, has castellated hole pads, facilitating integration in SMT applications. The RA4M1-Zero-M version comes with pre-soldered goldpin headers.
Properties
- Microcontroller: Renesas R7FA4M1AB3CFM (ARM Cortex-M4, 48 MHz)
- Built-in FPU, 256 KB Flash, 32 KB SRAM, 8 KB EEPROM
- 14-bit ADC, 12-bit DAC, CAN controller, USB 2.0
- Integrated WS2812 RGB LED controlled via pin D6
- Arduino IDE compatibility
- Board dimensions: 18 × 23.5 mm
- USB Type-C connector, host and device mode support
- BOOT button for uploading software
- RESET button
- LDO regulator ME6217C33M5G (max. 800 mA)
- Logic voltage selection: 3.3 V by default, switchable to 5 V
- Version with soldered headers (RA4M1-Zero-M)
1198941
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
LPCXpresso55S69 evaluation kit with LPC55S69 microcontroller with ARM Cortex-M33 core. The board contains a built-in debugging probe, audio subsystem and accelerometer, with the possibility of adding ready-made additional boards for connecting to the network, sensors, displays and other interfaces. NXP LPC55S69-EVK
zł298.99
1 weeks
No product available!
9-axis expansion module with motion sensors. The module combines two integrated circuits: FXAS21002C 3-axis gyroscope and FXOS8700CQ 6-axis accelerometer/magnetometer. The board is equipped with connectors compatible with Arduino R3. NXP FRDM-STBC-AGM01
Regular pricezł69.00zł29.00
24h
Available quantity: 102
Available
Available
No product available!
Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0936
zł29.90
24h
Available quantity: 5
Available
Development board specially designed to add advanced hardware I/O capabilities to your Android or PC application; PIC microcontroller connects an app on your PC or Android device to low-level peripherals like GPIO, PWM, ADC, I2C, SPI, and UART. DEV-13613
zł219.63
24h
Available quantity: 1
Available
IMXRT1050-EVKB is an evaluation set from NXT with i.MX RT1050 ARM Cortex-M7 600 MHz processor, 256 MB SDRAM memory, USB Host and OTG connector, Ethernet interface and SD card slot. IMXRT1050-EVKB
zł430.50
24h
Available quantity: 1
Available
Texas Instruments DS90UB925QSEVB / NOPB evaluation board
zł2,396.90
24h
Available quantity: 1
Available
STEVAL-DRONE02 is a compact, lightweight drone working with the STEVAL-FCU001V2 flight controller, designed for testing and demonstrating unmanned systems solutions. With its precise design and low weight, it is ideal for research on stabilization and navigation algorithms in closed spaces
zł252.75
24h
Available quantity: 4
Available
Demo and programming kit for NFC tags. Designed for emulation using the NTAG I²C plus tag system in embedded systems. NXP NTAG I2C Plus Explorer Kit
zł123.00
24h
Available quantity: 47
Available
The MIMXRT1176DVMAA dual-core evaluation kit that runs up to 1 GHz has 512 Mb SDRAM, 512 Mb Flash, and 128 Mb QSPI Flash. NXP MIMXRT1170-EVK
zł909.00
6 weeks
No product available!
Base board for dipPLD modules with XC2C256 (CoolRunner-II by Xilinx)
zł159.00
24h
Available quantity: 29
Available
Compact development board based on the i.MX 91 processor, equipped with 1 GB LPDDR4 RAM, 8 GB eMMC and a rich set of interfaces such as USB-C, Ethernet, CAN, or a 40-pin connector. The integrated IW610 module enables communication via Wi-Fi 6, Bluetooth LE 5.4, Zigbee, Thread and Matter, making it ideal for modern IoT and industrial applications. Linux® support and support for debugging via SWD and UART make it a flexible and efficient tool for embedded system designers. NXP FRDM-IMX91
zł423.96
24h
Available quantity: 1
Available
A specialized demonstration board designed to support Tail Tagging within the embOS/IP IP stack. Using this technology, it is possible to transform a single Ethernet port into several logical ports, enabling the creation of a virtual multiport network using only a single Ethernet port. Segger embOS/IP Switch Board (6.70.00)
zł512.87
1 weeks
No product available!
QN9080-DK is a development kit with the NXP BLE SOC QN9080 chip. This system has an integrated 32-bit ARM Cortex-M4F core and a Bluetooth communication system (BLE v5.0). In addition to the board with the QN9080 chip, the set includes a USB dongle (also with the QN9080 chip) which suits the master / slave communication between the two QN9080 chips.
zł883.88
24h
Available quantity: 1
Available
Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0935
Regular pricezł31.45zł27.26
24h
Available quantity: 4
Available
RA4M1-Zero-M is a compact development board based on the RA4M1 microcontroller, equipped with a USB Type-C connector, a range of peripheral interfaces, and software security features. Designed to work with the Arduino IDE and SMT environment, it is suitable for projects requiring small dimensions and advanced functionality.