![TinySA - 100kHz - 960MHz network analyzer with 2.8" display](https://kamami.pl/82195-large_default/tinysa-100khz-960mhz-network-analyzer-with-28-display.jpg)
![TinySA - 100kHz - 960MHz network analyzer with 2.8" display](https://kamami.pl/82195-large_default/tinysa-100khz-960mhz-network-analyzer-with-28-display.jpg)
zł340.65 tax excl.
Vector network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The vector network analyzer is an advanced tool in the field of electromagnetic signal analysis, offering comprehensive measurement capabilities in the frequency range from 100 kHz to 960 MHz. It is distinguished not only by its compact design, but also by a clear 2.8-inch display, on which information about the measured signal characteristics and analysis results are available. Valuable data can be easily read thanks to the color presentation, and up to 290 scanning points on the spectrum graph provide detailed information about the processes taking place.
The analyzer is equipped with two inputs: MF/HF/VHF input with a range of 0.1 MHz to 350 MHz and a UHF input with a range of 240 MHz to 960 MHz. The built-in signal generator is an additional function of the analyzer. With two outputs, it generates a sine wave from 0.1 MHz to 350 MHz and a square wave from 240 MHz to 960 MHz. The analyzer has bandpass filters with switched resolution, allowing for precise selection of the analysis band. This resolution can be adjusted from 2.6kHz to 640kHz, allowing both detailed and broadband signals to be studied.
In order to ensure the accuracy of measurements, the analyzer is equipped with an input step attenuator, the level of which can be adjusted from 0 dB to 31 dB. Please note that the attenuator cannot be used in conjunction with an LNA (Low Noise Amplifier) to avoid interference. For calibration and self-tests, a built-in calibration signal generator is used to ensure the accuracy and consistency of measurement results. The ability to connect the analyzer to a computer via a USB port enables data transfer and archiving, which supports the analysis and reporting of results. The device has a built-in battery, so it can be used as a portable network analyzer and work for at least 2 hours without access to a power source.
Vector network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 6 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi LCR-T7
Ionising radiation detector (a.k.a. dosimeter or Geiger counter). It is used to measure the dose of ionising radiation, i.e. the amount of energy that is absorbed by an organism or material during exposure to radiation. It is capable of detecting three types of radiation: X-rays (X-rays), Y-rays and β-rays. Fnirsi GC-01 Blue
No product available!
The air quality monitor allows you to monitor the concentration of formaldehyde (HCHO) in the air in real time. The device also measures temperature and air humidity. Uni-T A15F
No product available!
Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi M328 Blue
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano V2 2.8"
Vector network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 6 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
The PZEM-031 energy consumption meter is a device for internal use with a large LCD display that measures voltage, current, active power and energy in the voltage range of 6.5-100V DC and current 0-20A. It comes with power alarm, data memory and backlight control functions, but does not include additional cables or accessories.
No product available!
The RF signal meter is a versatile tool for measuring and analysing frequencies from 50 MHz to 2.4 GHz. It has an LCD display, extendable antenna and is powered by a 9V battery. GOOIT GY560
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 900 MHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano VNA
Quick 492G station designed for testing personal grounding in industrial conditions
No product available!
Portable instrument for measuring inductance, capacitance and resistance. It is equipped with a 2.8-inch TFT LCD display. Hantek 1833C
A detector that can detect hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an audible alarm. Fnirsi WD-02
No product available!
Portable hardness tester using the Richter hardness principle to measure the hardness of metals. Equipped with a 2.8-inch display and Bluetooth communication. Hantek HT360C
No product available!
Sound level meter (sonometer). Used to measure industrial and environmental noise levels. Uni-T UT352
No product available!
Non-contact tachometer for rotational speed measurement. Equipped with a 5-digit display and a USB interface. UNI-T UT372
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA