Pico-Servo-Driver module for servo control for Raspberry Pi Pico - Waveshare 19767
ID: 586274
5906623422517
zł40.48
Tax included
zł32.91 tax excl.
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
Description
The servo control module is designed to work with the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. The module has other connectors, which allow you to connect other elements. The board has a 5 V regulator with a current of 3 A. The servos can be powered via the USB connector by connecting to the Raspberry Pi Pico or via a screw connection with a voltage ranging from 6 to 12 V. It will work in projects that use a large number of modeling servos, e.g. during construction a walking robot or manipulator. Full documentation with examples is available on the product wiki page.
Pinout
Features
- 16 channels
- Resolution: 16 bits
- Connectors compatible with the servo interface
- Voltage regulator 5V 3A
- Mounting holes 3 mm
- Possibility of power supply from an external source with voltage from 6 to 12 V
- Servo power supply: 5V
- Power supply of the logic part 3.3 V
- Dimensions: 65 x 56 mm
586274
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 589
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
24h
Available quantity: 4
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 45
Available
Other products in the same category (16)
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
zł80.64
24h
Available quantity: 2
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
zł13.28
4 weeks
No product available!
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231
zł37.16
24h
Available quantity: 3
Available
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241
zł47.88
24h
Available quantity: 4
Available
Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor
zł163.90
24h
Available quantity: 4
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
zł214.77
24h
Available quantity: 2
Available
Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353
zł57.58
24h
Available quantity: 3
Available
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
zł118.82
4 weeks
No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
zł76.73
4 weeks
No product available!
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł69.15
24h
Available quantity: 5
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł85.90
24h
Available quantity: 1
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
zł39.54
24h
Available quantity: 2
Available
Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B
zł61.88
24h
Available quantity: 4
Available
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637
zł310.69
4 weeks
No product available!
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
zł90.41
24h
Available quantity: 3
Available
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver