zł0.34
Pico-Relay-B - 8-channel module with relays for Raspberry Pi Pico
ID: 586727
zł78.47
Tax included
zł63.80 tax excl.
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
8-channel module with relays designed to work with the Raspberry Pi Pico. It has built-in power isolation as well
optocouplers that prevent interference from the external high voltage circuit. The module uses high-quality relays with a contact load of up to 10 A at 250 V AC or 30 V DC. The board is closed in a protective casing made of ABS with a bracket for mounting on a rail. The USB port and BOOT pin make it easy to debug without disassembling the case, and the PWR indicator, RGB LED and a passive buzzer on the outside of the case allow you to add a simple indication of the operating status of the device. Full documentation with examples is available on the product wiki page.
Pinout
Features
- Built-in power isolation
- Built-in optocoupler isolation
- 8 x Relay 10A 250V AC or ≤10A 30V DC
- ABS protective housing with rail mounting bracket
- USB port and BOO pin
- PWR indicator, RGB LED and passive buzzer on the outside of the housing
- USB communication
- Voltage: 5V
- PCB dimensions: 145 x 90 x 40 mm
Kit contains
- ABS housing (two parts)
- Pico-Relay-B module
- Screwdriver
- A set of screws
586727
Data sheet
- Output current
- 10A
- Number of channels
- 8
- Executive element
- Przekaźnik
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 155
Available
Module with LCD IPS display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. Waveshare Pico-LCD-1.14
zł36.04
24h
Available quantity: 8
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł39.82
24h
Available quantity: 7
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł30.00
24h
Available quantity: 1
Available
Other products in the same category (16)
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
zł95.19
24h
Available quantity: 3
Available
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
zł113.59
24h
Available quantity: 2
Available
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
zł133.64
24h
Available quantity: 2
Available
Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B
zł67.77
24h
Available quantity: 6
Available
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
zł268.87
24h
Available quantity: 1
Available
Extension module with a Raspberry Pi Pico W board with WiFi communication. The set is equipped with relays, buffer inputs, sink type outputs and analog inputs. Pimoroni PIM632
zł452.36
24h
Available quantity: 1
Available
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
zł763.67
4 weeks
No product available!
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
zł237.29
24h
Available quantity: 2
Available
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
zł14.65
24h
Available quantity: 14
Available
A power supply module with a LiPo and Li-Ion battery charger dedicated to the Raspberry Pi Pico boards. It has a built-in button and over-discharge and overload protection. Pimoroni PIM557
zł45.34
4 weeks
No product available!
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
zł110.42
24h
Available quantity: 5
Available
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
zł9.50
24h
Available quantity: 9
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
zł51.44
24h
Available quantity: 3
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
zł20.98
24h
Available quantity: 2
Available
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637
zł310.69
24h
Available quantity: 3
Available
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
zł50.74
24h
Available quantity: 6
Available
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B