UPS 3S module (EU) backup power supply - Waveshare 25603
ID: 1188564
5906623483426
zł89.37
Tax included
zł72.66 tax excl.
Uninterruptible power supply (UPS) module, allowing continued operation and safe shutdown of the device after a power failure. AC adapter included. Waveshare UPS Module 3S (EU)
Description
UPS uninterruptible power supply module designed for mobile robots and other portable devices. After connecting three 18650 batteries, it maintains a stable output voltage of 5 V even after a power loss, which allows the device to continue operation and safely turn off. The battery charge status is indicated by built-in LEDs, and full battery status monitoring is possible thanks to the I2C interface. The set includes cables with buttons and sockets popular in various projects. Full documentation is available on the product Wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
Features
- I2C communication
- Real-time monitoring of battery voltage, current, power and capacity
- Overcharge/discharge protection circuits, overcurrent protection, short circuit protection and reverse polarity protection
- Battery warning indicators
- Charging: 12.6V 2A
- Power supply: 3 x 18650 batteries
- Voltage stabilizer 5V/5A, 3.3V/300mA
- 6-pin connector with I2C interface
- Output voltage: 5V
- Dimensions: 60 x 93 mm
Kit contains
- UPS Module 3S
- 12.6V 2A mains adapter
- Switch with XH2.54 connector 15cm
- XH2.54 male to DC5521 female cable 15cm
- Cable with double XH2.54 connector 15cm
- XH2.54 male to USB Type C cable 20cm
- Acrylic protective panels
- Screw set
1188564
Data sheet
- Output voltage
- 5th
- Output current
- 5A
- Supply voltage min
- 12 V
- Supply voltages max
- 12 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł138.88
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł117.07
24h
Available quantity: 4
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł82.64
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł35.76
24h
Available quantity: 1
Available
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
zł34.02
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845
zł35.60
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
zł34.02
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 500 mA. Pololu 2843
zł30.44
24h
Available quantity: 10
Available
Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842
zł31.83
24h
Available quantity: 3
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.09
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 2
Available
Uninterruptible power supply (UPS) module, allowing continued operation and safe shutdown of the device after a power failure. AC adapter included. Waveshare UPS Module 3S (EU)