Grove Infrared Reflective Sensor v1.2 - module with a reflection sensor
ID: 583227
5906623415892
zł26.73
Tax included
zł21.73 tax excl.
Module with a reflection sensor operating in the infrared band. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020174
Description
Module with a reflection sensor RPR-220 operating in the infrared band. The sensor consists of an emitter (IR diode) and a receiver (photo transistor) and detects elements at a distance of 4 to 15 mm. The module has a built-in diode indicating the output status and a potentiometer that allows for sensitivity adjustment. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface and is powered with a voltage of 3.3 V or 5 V. It can be used as a sensor for robots following a line or for field edge detection. Full documentation of the module with examples of use is available on the product page.
Features
- RPR-220 sensor
- Digital output (low state when the sensor detects the reflected wave)
- Detection range: 4 to 15 mm
- Response time: 10 us
- Potentiometer for sensitivity adjustment
- Supply voltage: 3.3 V or 5 V
- Current consumption: approx. 15 mA
- Dimensions: 89 x 140 x 10.5 mm
- Weight: 8 g
Kit contains
- Grove Infrared Reflective Sensor v1.2 module
- Grove cable
583227
Data sheet
- Type of sensor
- RPR-220
- Output type
- digital
- Number of sensors
- 1
- Power supply voltage
- 3,3 - 5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 39
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
Other products in the same category (16)
Module with 4 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4404
zł37.80
24h
Available quantity: 1
Available
Diffuse sensor with digital output. The threshold can be adjusted with the built-in potentiometer
zł9.68
24h
Available quantity: 14
Available
No product available!
Module with 11 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4411
zł100.60
24h
Available quantity: 1
Available
Module with 15 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4415
zł136.46
4 weeks
No product available!
Module with 3 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4343
zł30.16
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4313
zł116.87
24h
Available quantity: 1
Available
Module with 1 optocoupler type QTRXL with RC (digital) output. It is supplied with the voltage from 2.9 to 5.5 V, detects objects at a distance of up to 80 mm. Pololu 4541
zł15.82
4 weeks
No product available!
Module with 31 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4131
zł159.85
24h
Available quantity: 1
Available
Module with 3 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4303
zł28.12
24h
Available quantity: 1
Available
Module with 5 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4205
zł30.34
24h
Available quantity: 3
Available
No product available!
Module with 5 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4445
zł49.68
24h
Available quantity: 1
Available
Module with 4 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4204
zł22.36
24h
Available quantity: 2
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4213
zł68.23
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4453
zł120.76
24h
Available quantity: 1
Available
Module with a reflection sensor operating in the infrared band. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020174