.png)
- Out-of-Stock
Fiberlogy Easy PLA filament 1.75mm Midnight Sky
ID: 1178472
5902560997156
Easy PLA filament in Blue, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Midnight Sky
Description
Fiberlogy Easy PLA filament in Midnight Sky with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range of 200°C to 220°C, while the table temperature in the range of 50°C to 70°C. When using pads or other adhesion enhancing agents, table heating is not required. The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.
PLA filament is the basic filament used in 3D printing. It is characterized by good durability, and its properties allow precise printing of even complex elements. Easy PLA is a filament that allows you to get very good quality prints, avoiding printing problems. Thanks to its properties, Easy PLA material is recognized by both novice users and professionals. It is biodegradable and has very good adhesion between print layers.
The filament is available in different colors. It can be used to create prototypes, gadgets, toys and decorations.
Filament works great with most 3D printers available on the market. Check out our offer of 3D printers and choose the best set for you.
Features
- Ruby Midnight Sky
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.02 mm
- Oval tolerance: +0.01 mm
- Printing temperature: 200°C to 220°C
- Table temperature: 50°C to 70°C (when using pads or other adhesion promoters, table heating is not required)
- Net weight: 0.85 kg
- Total weight: 2.5 kg
1178472
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,85 kg
- Diameter
- 1,75 mm
- Colour
- Blue
- Type of packaging
- Spool
Manufacturer
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 Brzezie
- Poland
- [email protected]
Responsible person
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 387 Brzezie
- Poland
- [email protected]
You might also like
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
Other products in the same category (16)
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
Retired
No product available!
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
EEPROM CAT93C86LI-G memory; 16kbit; 2K x 8bit; access time: 150ns; Power supply: 1.8 ... 5.5 V; 8-Pin PDIP
Retired
No product available!
Easy PLA filament in Blue, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Midnight Sky