- Out-of-Stock
The Measurement Computing USB-1608GX are USB-based, high-speed, multifunction DAQ devices. Each device offers 16 SE/8 DIFF analog inputs, eight digital I/O channels, two counter inputs, and one timer output. These devices are USB-powered and require no external power.
These devices provide 16-bit analog inputs that are software-selectable as eight DIFF or 16 SE inputs. They also support input ranges of ±10 V, ±5 V, ±2 V, and ±1 V that are software-selectable per channel. Both devices feature a maximum 500 kS/s sample rate.
USB-1608G Series devices have an external digital trigger input. The trigger mode is software-selectable for edge- or level-sensitive mode. Users can configure edge-sensitive mode for either rising or falling edge. In level-sensitive mode, the trigger can be configured for either high or low level. The default setting at power up is edge sensitive, rising edge.
Eight bidirectional digital I/O lines are individually configurable for input or output. The DIO terminals can detect the state of any TTL-level input. Users can configure for pull-up (+5 V) or pull-down (0 V) with an onboard jumper.
Two 32-bit event counters are provided to count TTL pulses. The counters accept inputs of up to 20 MHz.
A PWM timer output generates a pulse output with a programmable frequency in the range of 0.0149 Hz to 32 MHz. The timer output parameters are software selectable.
Software support includes DAQami, an optional out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, Linux®, and Python™.
Pmod MTDS is a module with a 2.8-inch LCD display. It has a resolution of 320x240 pixels. It has touch support (capacitive, 2 point). Digilent 410-341
No product available!
Pmod SSR is a module with a semiconductor relay. One GPIO port is required for control, the relay is suitable for operation with up to 48 V, it can be used for devices that draw current up to 6 A. Digilent 410-342
No product available!
SparkFun Inventor’s Kit is a great way to get started with programming and hardware interaction with the Arduino programming language. The kit includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit. KIT-13970
No product available!
RoboClaw 2x60A Motor Controller (V6) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 60A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3289
No product available!
Development kit with STM32F103R8T6 microcontroller and 2.8 "TFT display with touch panel.
No product available!
Gold-plated HDMI (M) - HDMI (M) cable with a length of 1.5 m, Ultra Slim, RoHS
No product available!
No product available!
No product available!
No product available!
PCB with programmed system for slow brightener for 12V LED strips. AVT1975 A +
No product available!
AVT kit for self-assembly slow slow brightener for 12V LED strips. AVT1975 B
No product available!
Assembled slow brightener for 12V LED strips. AVT1975 C
No product available!
No product available!
No product available!
Module with a CCS811 air quality sensor that allows you to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via the I2C interface. Adafruit 3566
No product available!
Printed circuit board and programmed layout for RD Lidia 80 Digital. AVT5527 A +
No product available!
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-010