- Out-of-Stock
1.75 mm PLA filament for 3D printing by ROSA3D. 3 kg of filament is wound on the spool. The recommended printing temperature is in the range from 200°C to 230°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
R-PLA is a recycled filament designed with the environment in mind. Like PLA, it is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable polymer. It was made of ingredients approved for contact with food. The PLA Starter filament from Rosa3D was created with beginner users of 3D printers in mind. The simplicity of printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
R-PLA production batches may vary in color intensity ranging from dark gray, through graphite to anthracite black.
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
ROSA3D filament made of high-quality, recycled PLA. 1 kg of 1.75 mm filament is wound on the spool. ROSA3D R-PLA Black
No product available!
Solarbotics GMPW-Y YELLOW Wheel with Encoder Stripes, Silicone Tire
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
No product available!
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
No product available!
The adapter is designed for mounting LEGO wheels on an axis with a diameter of 2 mm used, among others. in Pololu mini motors with a plastic gear. Pololu 1001
No product available!
A small motor with a plastic gear 120:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1125
No product available!
A small motor with a plastic gear 180:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1593
No product available!
A small motor with a plastic gear 180:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1594
No product available!
No product available!
No product available!
No product available!
No product available!
MinIMU-9 v2 Gyro, Accelerometer, and Compass (L3GD20 and LSM303DLHC Carrier)
No product available!
No product available!
No product available!
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą500°/s and ą2000°/s Ranges
No product available!
No product available!
ROSA3D filament made of high-quality, recycled PLA. 3 kg of 1.75 mm filament is wound on the spool. ROSA3D R-PLA Black