- Out-of-Stock
120:1 6V - plastic gear motor (90° Output)
ID: 195512
5906623476978
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
Description
Motor with plastic gear 120:1 and output shaft at a 90° angle with flattened sides with a diameter of 7 mm and a length of approx. 6 mm. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 85 RPM and a maximum torque of 5.4 kg*cm, consuming a current from 0.07 A to 0.8 A.
Suitable mounting brackets in the standard and high version are available for the motors.
Our offer includes a number of controllers that perfectly cooperate with the presented engines.
 |
 |
 |
Features
- Motor type: with plastic gear
- Gear: 120:1
- Supply voltage: 3 to 12 V (typical 6 V)
- Speed: 85 RPM
- Maximum torque: 5.4 kg*cm
- Minimum current consumption: 0.07 A
- Maximum current consumption: 0.8 A
- Shaft diameter: 7 mm
- Dimensions: 64,4 x 22,3 x 21 m
- Weight: 32 g
195512
Data sheet
- DC motor power
- Other
- Gear material
- Plastic
- Gear ratio
- 120:1
- Rotation speed
- 85RPM
- Shaft diameter
- 7 mm
- Shaft shape
- Two sides flattened
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual motor controller that allows you to control two DC motors with 2.7-10.8V voltage and 1.2A continuous current per channel. Pololu 2130
zł43.00
Delivery date unknown
No product available!
Pololu Low-Voltage Dual Serial Motor Controller
zł158.61
24h
Available quantity: 1
Available
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
zł92.57
24h
Available quantity: 1
Available
These aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors.
zł31.11
24h
Available quantity: 3
Available
These extended aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. The extended “neck” on these brackets allows for a large variety of mounting options. These brackets are sold in pairs, and each bracket comes with two 1″ long #2-56 screws for securing motors to the bracket.
zł31.02
Delivery date unknown
No product available!
Other products in the same category (16)
T. Kosiło (ed.), H. Chaciński, W. Kazubski, J. Modzelewski, K. Radecki
Delivery date unknown
No product available!
No product available!
Male terminal block, angled, 12-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR
Retired
No product available!
No product available!
The AI accelerator with a USB connector is based on the Lightspeeur SPR2801S chip with a performance of up to 9.3 TOPS per watt. Optimized for use with single board computers based on Allwinner SoC chips, incl. Orange Pi. Orange Pi AI Stick Lite
Retired
No product available!
The LoRa omnidirectional antenna is made of fiberglass. It has an average gain of 5 dBi and works in the frequency range from 860 to 930 MHz. Seeed Studio 318020612
Retired
No product available!
No product available!
No product available!
Retired
No product available!
No product available!
No product available!
AVT kit for self-assembly LED ring illuminator. AVT1918 B
Retired
No product available!
Permanent cylindrical neodymium magnet with a diameter of 10 mm and a height of 1 mm.
Retired
No product available!
No product available!
Tondo Clovis L., Tondo Clovis L.
Delivery date unknown
No product available!
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121