.png)
- Out-of-Stock
120:1 4,5V - mini plastic gear motor
ID: 195516
5906623477036
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
Description
A small motor with a plastic gear 120:1 and an offset shaft with a diameter of 2 mm. The recommended operating voltage of the motor is 4.5 V and at this voltage it reaches a speed of 120 RPM and a maximum torque of 1.4 kg*cm, consuming a current from 0.08 A to 0.8 A. The motor uses a shaft with grooves compatible with adapters for LEGO wheels.
Suitable mounting brackets in low and high versions are available for the motors.
Our offer includes a number of controllers that perfectly cooperate with the presented engines.
 |
 |
 |
Features
- Motor type: mini with plastic gear
- Gear: 120:1
- Supply voltage: 3 to 6 V (typical 4.5 V)
- Speed: 120 RPM
- Maximum torque: 1.4 kg*cm
- Minimum current consumption: 0.08 A
- Maximum current consumption: 0.8 A
- Shaft diameter: 2 mm
- Dimensions: 36.5 x 20 x 27.4 m
- Weight: 19 g
195516
Data sheet
- DC motor power
- Other
- Gear ratio
- 120:1
- Gear material
- Plastic
- Rotation speed
- 120RPM
- Shaft diameter
- 2 mm
- Shaft shape
- Round
- Obustronny wał silnika
- Nie
- Power supply voltage
- 4.5V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Pololu Low-Voltage Dual Serial Motor Controller
zł157.99
24h
Available quantity: 1
Available
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
zł89.89
24h
Available quantity: 1
Available
DRV8835 Dual Motor Driver Carrier
zł23.65
24h
Available quantity: 10
Available
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
zł25.55
24h
Available quantity: 2
Available
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
zł25.55
24h
Available quantity: 4
Available
Other products in the same category (16)
The general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3108
Retired
No product available!
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3109
Retired
No product available!
This version has a 56:1 metal gearbox with a 0.276"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 250 mA free-run, 45 oz-in (3.3 kg-cm) and 3.3 A stall. Pololu 1450
Retired
No product available!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
The UM7 orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Pololu - 2741
Retired
No product available!
The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-down regulator that allows it to be powered efficiently from a 5 V to 36 V supply. Pololu 3104
Retired
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 6 A.
Retired
No product available!
High performance full NFC compliant expansion board compatible with Raspberry Pi. EXPLORE-NFC
Retired
No product available!
SATA line for Banana Pi only. Connects a 2.5 inch Hard Disk to your Banana Pi Computer
Retired
No product available!
No product available!
This is an aluminum heat-sink for the Banana Pi RAM Chips. Run cool RAM chips with this little add-on. Just one heat-sink is needed to cover both RAM chips, use the picture below as reference. Signs of RAM or CPU overheating are computer stops responding, frozen screen and power shutt down or cycling.
Retired
No product available!
The Serial Port module is specifically designed for Banana Pi with the module use Maxim MAX232 chip and DB9 port
Retired
No product available!
Digilent ZYBO SoC platform powered by Xilinx Zynq Z-7010 with a dual-core ARM® Cortex-A9 processor and an Xilinx 7-series FPGA. 410-279
Retired
No product available!
NI LabVIEW is a graphical programming platform used by millions of engineers and scientists for problem solving, data acquisition and analysis, instrument control, automated testing and validation, prototyping, and more. 6002-549-000
Retired
No product available!
Arduino M0 PRO (M0+ Atmel processor) with build in companion chip to let you debug your application
Retired
No product available!
Banana pi BPI-G1 WIFI, BT4.0, Zigbee smart home gateway board
Retired
No product available!
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122