.png)
- Out-of-Stock
Prusament PLA Prusa Orange 1kg, 1.75mm filament
ID: 1199705
8594173675292
PLA filament (Prusa Orange) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers
Description
Prusament PLA Prusa Orange is intended for 3D printing of models requiring high surface quality, precise geometry reproduction, and stable process parameters. Manufacturing by Prusa Research includes continuous diameter measurement with an accuracy of ±0.02 mm, color consistency control, and mechanical property verification for each production batch. Each spool features an individual QR code providing access to detailed production data.
PLA material offers low shrinkage and good dimensional stability, reducing the risk of deformation even when printing larger parts on open-frame printers without an enclosed chamber. The Prusa Orange color provides an intense, uniform surface with high contrast, suitable for prototypes, enclosures, identification parts, and visual models. Compared to PETG, PLA enables easier print parameter setup and more accurate reproduction of fine details, with lower resistance to elevated temperatures and mechanical loads.
Features
- Material: PLA
- Color: Prusa Orange
- Filament diameter: 1.75 mm
- Diameter tolerance: ±0.02 mm
- Net weight: 1 kg
- Printing temperature: 215°C
- Bed temperature: 50-60°C
- Recommended build plates: smooth, textured, satin
- Low shrinkage and good dimensional stability
- Good detail reproduction
- Manufactured by: Prusa Research
1199705
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Pomarańczowy
- Type of packaging
- Spool
Other products in the same category (16)
No product available!
Banana Pi M2+ is another ARM SoC powered development board that offers great computing performance in an ultra portable form factor. It is a 65mm square with Allwinner H3 Quad-core A7 SoC and 1GB DDR3 RAM
Retired
No product available!
Self-assembly DIY enclosure for Banana Pi M2+, transparent
Retired
No product available!
LSF0204PWR, 4-Bit Bidirectional Multi-Voltage Level Translator for Open-Drain & Push- Pull, TSSOP14
Retired
No product available!
Lithium Polymer rechargeable cell with a Protection circuit. Compatible with ODROID-C0
Retired
No product available!
MYIR MYC-JA5D44 is a single-board computer in the form of a card with SO-DIMM 200-pin connector. The SAMA5D44 processor from Atmel, based on Cortex-A5 cores, has been equipped. It can work with a maximum frequency of 600 MHz. It has 512 MB of DDR2 SDRAM, 512 MB of NAND Flash memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector.
Retired
No product available!
MYIR MYC-C7Z020 is a single board computer module based on the MYC-C7Z020 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
This is the Green Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Blue, Red, White, and Yellow! Adafruit 3107
Retired
No product available!
UART GPS Module, NEO-7M-C onboard, straight/vertical pinheader
Retired
No product available!
The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get. A000133
Retired
No product available!
Printed circuit board with programmed layout for a dual-function acoustic switch. AVT3144 A +
Retired
No product available!
Programmed layout for a dual-function acoustic switch. AVT3144 UK
Retired
No product available!
A set for self-assembly of a dual-function sound switch. AVT3144 B
Retired
No product available!
Ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system; built-in 4.7KΩ pullup resistors for I2C communications. SEN-13763
Retired
No product available!
Printed circuit board and programmed clock system with a 20mm display set by means of GPS. AVT5522 / 1 A +
Retired
No product available!
AVT kit for self-assembly of an accurate clock with a 20mm display set by means of GPS. AVT5522 / 1 B
Retired
No product available!
PLA filament (Prusa Orange) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers