LPC1227FBD64/301

TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02

Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05

USB TO UART solution with USB Type A connector, Waveshare

Oyvind Nydal Dahl

The second version of the clock synchronization signal receiver, transmitted with AM modulation (DCF77). The built-in MAS6180 system allows you to receive timing frames from a time pattern using a carrier frequency of 77.5 kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77 v2

Pyboard is a compact development board that allows you to use the MicroPhyton software. Min. 3-axis accelerometer (MMA7670), diodes, monostable buttons and microSD memory card slot. Adafruit 3497

LCD touch screen with 160x128 pixel resolution, LCD160CR (I2C or UART and SPI) display controller. Adafruit 3498

Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF

Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C

Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C

Desktop computer kit with expansion board that can turn a Raspberry Pi into a real desktop PC.

BB Black Expansion CAPE, Features RS485 and CAN Interfaces

32-bit microcontroller with ARM Cortex-M4 core, Ultra-low-power, 144 pins, 1 MB Flash, 320 KB SRAM, temperature range -40 ... 85 ° C, LQFP144, STMicroelectronics, RoHS

NVIDIA development kit with the Tegra X2 SoC chip containing two Denver cores, four 64-bit ARM Cortex A57 cores and a Pascal graphic layout consisting of 256 cores supporting CUDA technology. Jetson TX2 Development Kit

A set of PCBs with a programmed layout for the LED thermometer - version 27mm green. AVT1697 / 2 / G A +

AVT kit for self-assembly of the LED thermometer - 27mm green version. AVT1697 / 2 / GB