- Out-of-Stock

Pololu Serial 8-Servo Controller (partial kit)
This version of the product is packaged as a partial kit in which the surface-mounted components are already assembled. Male header pins and a DB9 connector are included, but they need to be soldered in by the user.
Note: We have released second-generation Micro Maestro and Mini Maestro USB servo controllers, which are better than this product in almost every way.
![]() |
The Pololu serial 8-servo controller allows you to control up to eight RC servos with almost any robot controller or computer. The interface to the servo controller is a standard RS-232 serial port or a TTL-level serial line, using any baud rate between 1200 and 38400 baud. Multiple 8-servo controllers can be connected to a single serial line to control up to 128 servos independently. The servo controller is compatible with all of our serial motor controllers and servo controllers. The servo controller is also compatible with the Scott Edwards MiniSSC II servo controller and any software written for it.
![]() |
All of the ports are conveniently labeled on the back of the PCB. This servo controller can be reset directly from a serial port using the DTR or RTS handshaking lines. Other unique features include individual servo speed and range control. Three diagnostic LEDs get you up and running quickly.
You can purchase the servo controller as a partial kit that requires soldering of the through-hole components (header pins and DB9 connector) or as a completely assembled unit. The Pololu serial 8-servo controller is not a standalone device: to use it, you must connect it to power supplies, servos, and a main controller that you program to send commands to the servo controller.
Note: This product no longer ships with a printed user’s manual. The user’s manual can be downloaded as a pdf from the resources tab of this product page.
![]() |
Pololu Micro Serial Servo Controller (partial kit) |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
LCD 2x16, 80x36mm, FSTN NEGATIVE, LED backlight (green), enhanced temperature range, RoHS
No product available!
No product available!
Panasonic Eneloop PRO R03/AAA rechargeable batteries with a minimum capacity of 930mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-4HCDE/4LE
No product available!
KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter
No product available!
ROSA3D filament made of high-quality polycarbonate with polybutylene terephthalate. 0.5 kg of 1.75 mm filament is wound on the spool. ROSA3D PC-PBT Black
No product available!
No product available!
No product available!
USB C8051F programmer with programming and debugging function
No product available!
Usb interface prototype card - extended version - self-assembly set
No product available!
The resistance meter allows you to measure low resistance values from 120 mΩ with a resolution of 10 uΩ. It is used to measure small DC resistances with the 4-wire method. Equipped with a USB interface and Li-Ion battery. Uni-T UT620A
No product available!
No product available!
Bluetooth 2.1 + EDR module based on RN41. It communicates via the UART interface. SparkFun WRL-12580
No product available!
No product available!
No product available!
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
No product available!
No product available!
Pololu Serial 8-Servo Controller (partial kit)