- Out-of-Stock
FREE TELEPHONE SWITCH - A SELF-ASSEMBLY KIT
The device has been designed for remote control and supervision of other electrical consumers. The telephone line is used as the transmission medium. This allows you to control eg the state of the switch, from virtually anywhere.
Changes to the receiver's status can be made from any telephone apparatus both stationary and mobile. The switch allows control of one external device. When it is being serviced, no connection is established, which does not entail any operating costs. The executive relay can also be switched stationary, without using a telephone line.
The device is particularly useful for people who want to remotely control (devices all kinds of) via a telephone line
Selected parameters:
Download
Manufacturer
Responsible person
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
No product available!
FREE TELEPHONE SWITCH - A SELF-ASSEMBLY KIT