AVT5096 B

ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Aluminium

A small size module with 5 pins led to the USB Mini-B connector. The system can be connected to a contact plate or used as an unregulated and unlimited voltage source 5V and current up to 100mA. BOB-09966

Plastic enclosure Z123 ventilated lightgray ABS

NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 256MB and a built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2

CYPISEK - RECEIVER (MAIN BOARD) - PLATE

Permanent cylindrical neodymium magnet with a diameter of 6 mm and a height of 1,5 mm.

This gearmotor is a powerful 12V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1200 counts per revolution of the gearbox’s output shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W

Tony Olsson, David Gaetano, Jonas Odhner, Samson Wiklund

OPENING FITTING DEVICE - PLATE PLATE

Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter