.png)
- Out-of-Stock
AVT594 B KPL
ID: 193021
REMOTE CONTROLLED POTENTIOMETER FOR THE AUDIO APPLICATION - SELF-MOUNTING KIT
REMOTE CONTROLLED POTENTIOMETER FOR THE AUDIO APPLICATION - A SELF-ASSEMBLY KIT
Producer: AVT
The device is perfect for any audio amplifier equipped with a standard 'manual' potentiometer. The proposed system is very easy to use and easy to make even for the beginner electronics. The kit is not dedicated to any specific remote control. To operate it, any RC5 code transmitter is enough.
The controller is a universal system. After replacing the potentiometer with a motor with a gear, it can operate, for example, window blinds.
The device is recommended for all audiophiles, electronics who want to modernize the equipment and constructors of electromechanical devices
Selected parameters:
- remote control of any remote control working with the RC5 code
- AT90S2343 microcontroller
- system programming mode
- additional relay
- power supply - 12 V
- set includes elements (with remote control and potentiometer with motor), printed circuit board and documentation
An assembled version (with remote control and potentiometer with motor) AVT594 C KPL is available- A detailed description in EP 10/04
Download
193021
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
No product available!
The miniature digital potentiometer allows you to replace the analog potentiometer and control the resistance value using two buttons. The module contains inputs of the UP / DOWN buttons (for increasing and decreasing the resistance) and outputs in accordance with the analog potentiometer A, W, B (description on the circuit board). MOD-19.Z
Retired
No product available!
Xmega eXploreGO module with ATXmega128A4U microcontroller (version without MP3). The module is equipped with in DataFlash memory, microSD card connector. MOD-20 / AZ
Retired
No product available!
MOD-21.Z - push button module with bistable operation. The sensor operates based on the AT42QT1012 system.
Retired
No product available!
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply
Retired
No product available!
No product available!
MOD-25.Z - touch sensitive button module with monostable function. The sensor operates based on the AT42QT1011 system.
Retired
No product available!
No product available!
No product available!
The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z
Retired
No product available!
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
Retired
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
Retired
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
Retired
No product available!
REMOTE CONTROLLED POTENTIOMETER FOR THE AUDIO APPLICATION - SELF-MOUNTING KIT