- Out-of-Stock
In many places it is required to maintain the temperature at a given value. This applies not only to living quarters in the winter but also to other, such as greenhouses.
The presented two-zone thermostat consists of three modules:
All modules have an RS485 interface. Thanks to this, it is possible to distance the temperature sensors and actuators from the controller to a distance of up to 1,200 meters!
The presented thermostat allows you to measure temperature in three places: locally, near the controller itself and remotely in two points. The use of the RS485 interface to design not only enabled remote temperature measurement, but also made the transmission resistant to interference.
Recommendations: the project is not only functional, but also presents the use of the RS485 interface in its own device. We particularly dedicate it to people dealing with building automation.
Basic parameters:
A version with a set of components for self-assembly AVT5178 B is available
Detailed description EP 03/09
Download
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
HumidIcon™ Digital Humidity/Temperature Sensor, I2C, hydrophobic filter, SOIC8, Honeywell, RoHS
No product available!
High voltage differential probe. It has good measurement parameters: 100 MHz band and operating voltage up to 1300 V. The probe has two damping factors: 50X and 500X. Micsig DP10013
No product available!
RFID tag sticker for systems operating at 125 KHz. Provides the ability to read and write a unique ID number
No product available!
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242
No product available!
No product available!
7-segment LED display, 1 number 14,20mm, gray background, red color (640nm), 6000 ucd (10mA), common cathode, Pb-free. LED1-AS-N-05613AS
No product available!
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
A circuit board for a universal 2-channel relay module. AVT1914 A
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. ArduCAM B0199
No product available!
Permanent cylindrical neodymium magnet with a diameter of 3 mm and a height of 3 mm.
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
No product available!
A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301
No product available!
Keyboard module with joystick and 5-bit communication interface
No product available!
Minicomputer with built-in NVIDIA Jetson Nano module with 4 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061361
No product available!