AVT217 / 1 C

The 8520 Hollow Cup DC Motor, a miniature 3.7V DC motor with speeds up to 37,000 rpm, is ideal for applications requiring fast response and low weight, such as micro drones, mobile robots, and test equipment drive systems. Its compact size and lightweight design facilitate integration into electronics and mechatronics designs

The 5.5×2.5 mm to 5.5×2.5 mm DC jack adapter allows you to quickly adapt your power supply plug to devices with a different DC jack size. It\'s used to power electronic modules, network equipment, and monitoring systems

The Jetson Nano 2GB Kit from Seeed Studio is a development platform with a 128-core Maxwell GPU, designed for learning and prototyping real-time AI solutions. It supports JetPack SDK, HDMI, CSI, Ethernet, and GPIO, making it ideal for educational and robotic projects.

A high-performance 128GB M.2 PCIe Gen 3 x4 SSD offering fast data transfer rates and technologies that enhance write integrity and durability. It\'s ideal as a fast system drive in NVMe-enabled laptops and desktops. Patriot P300P128GM28

Demineralized water produced by Kryptontek in a 1000 ml PET bottle is used in electronics, technical service, and laboratories. It provides high purity and safety for precision devices and systems that require operation with water free of mineral contaminants.

ESP32-P4-WIFI6-DEV-KIT-C is the most comprehensive kit with a 10.1" display, camera and full audio-video support, dedicated to HMI applications, intelligent control systems and interactive IoT devices. It provides high performance, multi-protocol connectivity and integration capabilities with AI platforms and industrial-grade security systems.

ESP32-P4-WIFI6-DEV-KIT-B is a complete development environment with a touch display, camera and speaker, ideal for creating user interfaces, interactive devices and automation systems with Wi-Fi 6, BLE and Ethernet support. The kit enables rapid prototyping of projects with image and sound processing and integration with AI platforms.

ESP32-P4-WIFI6-DEV-KIT-A is an advanced development kit with a 5 MP camera and Wi-Fi 6 support, intended for implementing HMI projects, voice control, vision systems and network applications. The integration of multimedia interfaces, Ethernet and hardware security enables the creation of modern, high-performance IoT systems.

ESP32-P4-WIFI6-DEV-KIT is an advanced development board with ESP32-P4 and ESP32-C6, designed for multimedia applications, HMI systems, edge data processing and IoT with support for Wi-Fi 6 and Bluetooth 5. It supports a camera, DSI display, Ethernet and audio and enables expansion through GPIO and PoE connectors.

The Zeenko 10 dB SMA attenuator is a solid and precise component for RF measurement paths, useful in diagnostics, calibration and protecting devices such as the tinySA, nanoVNA or RF generators. It enables safe measurements and improves impedance matching quality over a wide frequency range.

Crowtail-Tilt Switch 2.0 is a simple digital sensor that detects a change in the module’s position along the vertical–horizontal axis. Used in projects requiring tilt detection, orientation signaling or activation depending on position.

A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 ​​Walkie-Talkie Mini

Black PETG filament with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers.

PETG filament (black) with a diameter of 1.75 mm and a net weight of 1 kg, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, intended for FDM 3D printers. Prusa Research

PETG filament (Anthracite Grey) with 1.75 mm diameter and 1 kg net weight, manufactured by Prusa Research with a diameter tolerance of ±0.02 mm, designed for FDM 3D printers. Prusa Research

Prusament PLA filament in Gravity Grey color with a 1.75mm diameter, designed for FDM 3D printers, manufactured by Prusa Research with parameter control along the entire spool