- Out-of-Stock
These two-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
| Pins | A (mm) | B (mm) |
|---|---|---|
| 1×1 | – | 2.54 |
| 1×2 | 2.54 | 5.08 |
| 1×3 | 5.08 | 7.62 |
| 1×4 | 7.62 | 10.16 |
| 1×5 | 10.16 | 12.70 |
| 1×6 | 12.70 | 15.24 |
| 1×7 | 15.24 | 17.78 |
| 1×8 | 17.78 | 20.32 |
| 1×9 | 20.32 | 22.86 |
| 1×10 | 22.86 | 25.40 |
| 1×12 | 27.94 | 30.48 |
| 1×16 | 38.10 | 40.64 |
| 2×2 | 2.54 | 5.08 |
| 2×3 | 5.08 | 7.62 |
| 2×4 | 7.62 | 10.16 |
| 2×5 | 10.16 | 12.70 |
| 2×6 | 12.70 | 15.24 |
| 2×7 | 15.24 | 17.78 |
| 2×8 | 17.78 | 20.32 |
| 2×10 | 22.86 | 25.40 |
| 2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
Manufacturer
Responsible person
Printed circuit board and programmed circuit for unipolar stepper motor driver. AVT1985 A +
No product available!
AVT kit for self-assembly of a unipolar stepper motor driver. AVT1985 B
No product available!
Assembled unipolar stepper motor driver. AVT1985 C
No product available!
Printed circuit board and programmed circuit for the MIN-MAX 2-channel thermometer with alarm. AVT1999 A +
No product available!
AVT kit for mounting a 2-channel MIN-MAX thermometer with an alarm. AVT1999 B
No product available!
Assembled 2-channel MIN-MAX thermometer with alarm. AVT1999 C
No product available!
Printed circuit board and programmed layout for a miniature reminder. AVT5638 A +
No product available!
AVT kit for self-assembly of a miniature reminder. AVT5638 B
No product available!
No product available!
A circuit board for an adjustable power supply for contact plates. AVT1990 A
No product available!
AVT kit for self-assembly of an adjustable power supply for contact plates. AVT1990 B
No product available!
Assembled adjustable power supply for contact plates. AVT1990 C
No product available!
PCB for modular receiver for 80m and 40m bandwidth. Dosia - S-meter signal level meter. AVT3197 A
No product available!
Pololu motor with 48 CPR encoder, with 227: 1 transmission, standard 12V voltage and 33RPM speed. Polol 3245
No product available!
Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. TWR-K65F180M
No product available!
FRDM-K28F is a development board for Kinetis microcontrollers based on ARM Cortex-M4 with numerous peripherals including 6-axis digital accelerometer and magnetometer, USB interface, microSD card slot, three-color LED and two user buttons. FRDM-K28F
No product available!