- Out-of-Stock
FLORA Accelerometer/Compass Sensor - LSM303 - v1.0
ID: 203913
Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. Adafruit 1247
Description
Add motion and direction sensing to your wearable Flora project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself.
We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the Flora is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your Flora, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side.
We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the Flora is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your Flora, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side.
203913
Data sheet
- Interface
- I2C
- Type of sensor
- LSM303D
- Module type
- 6DoF
- Power supply voltage
- 2,2 - 3,6 V
- Sensor type
- Akcelerometr i magnetometr
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DEV-10867 - Conductive Thread Bobbin - 30ft (Stainless Steel)
zł29.90
24h
Available quantity: 10
Available
Adafruit 640 - Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
zł36.36
24h
Available quantity: 2
Available
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
zł43.46
24h
Available quantity: 1
Available
The Flora starter kit contains everything you need to start an adventure with smart clothing. Included, among others main board, GPS module, LED diodes, conductive cord, battery basket. Adafruit 1090
zł618.95
Delivery date unknown
No product available!
FLORA is Adafruit\'s fully-featured wearable electronics platform. It\'s a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects. Adafruit 659
Regular pricezł76.69zł66.26
24h
Available quantity: 1
Available
The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates.
zł787.82
24h
Available quantity: 1
Available
Other products in the same category (16)
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. Adafruit 1247