.png)
- Out-of-Stock
AVT945 A
ID: 208743
AUDIOFILSKI POTENTIOMETER AND BALANCE REGULATOR - PRINTED PLATE
AUDIOFILSKI POTENTIOMETER AND BALANCE REGULATOR - PRINTED PLATE
Producer: AVT
A simple yet functional digital audio controller. The system fulfills the role of a stereo potentiometer to adjust the signal levels (gain) as well as the balance regulator. The settings are carried out with the help of a single encoder with a button in the shaft. The system's high simplicity is due to the use of a modern (commercial premiere in June 2006) integrated circuit MAX5440. It is a digital, stereo audio potentiometer - regulation is available in 31 steps. The system includes a LED control decoder. They act as an indicator of the position of "sliders" of analog regulatory knobs.
The device is especially recommended for fans and people who perform audio equipment themselves
Selected parameters:
- level and balance adjustment of the stereo signal
- control of a single encoder with a button
- imaging settings - LED diodes
- level of distortion <0.0003%
- 2 dB adjustment step
- built-in glitch elimination system
- after switching the power on, the setpoints are set at -12 dB
- possibility of cooperation with an attached preamplifier (optional)
- power supply: 5 Vdc
- printed circuit board and documentation included
A detailed description in EP 8/06
208743
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
AVT kit for self-assembly of a power controller with LCD display. AVT3218 B
Retired
No product available!
Assembled power amp with LCD display. AVT3218 C
Retired
No product available!
RGB LED 32 x 32 display module (1024 LEDs). Refresh rate 1: 8. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun SPX-14633
Retired
No product available!
TFMini is a small laser rangefinder with a measuring range of 0.3 to 12 meters. The measurement resolution is 5 mm. ToF technology (Time of Flight) is used for measurement. Communication with the sensor takes place via the UART interface. SparkFun SEN-14588
Retired
No product available!
GraspIO Cloudio is HAT for use with Raspberry Pi. It allows creating many interesting IoT projects. It is based on the ATmega 32U4 microcontroller. It has an OLED display, an IR receiver, a light sensor, a temperature sensor, an RGB LED and a buzzer. CLOUDIO-SMRTDEV-R-V1
Retired
No product available!
No product available!
No product available!
BleBox AirSensor is an air quality sensor informing about the presence of harmful dust (PM1, PM2,5, PM10) suspended in the home and outside.
Retired
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
Retired
No product available!
SparkFun Papa Soundie Audio Player is a board with ATmega328P microcontroller and VS1000D chip, which allows you to play sounds (in OGG Vorbix and WAV format) stored on a microSD memory card. The board has a 3.5 mm jack connector. SparkFun DEV-14554
Retired
No product available!
Retired
No product available!
Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board
Retired
No product available!
FDC638APZ is a high-efficiency P-Channel MOSFET in a compact SSOT-6 package, optimized for fast switching and space-constrained power control applications.
Retired
No product available!
No product available!
No product available!
Starter kit with Arduino MKR1000 board designed for learning the basics of IoT (Internet of Things). Arduino GKX00006
Retired
No product available!
AUDIOFILSKI POTENTIOMETER AND BALANCE REGULATOR - PRINTED PLATE