- Out-of-Stock
![Moduł 9DoF z układem MPU9250 - akcelerometr, żyroskop, magnetometr Moduł 9DoF z układem MPU9250 - akcelerometr, żyroskop, magnetometr](https://kamami.pl/27698-large_default/sparkfun-imu-breakout-mpu-9250.jpg)
The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. Each of these 9DoF breakouts feature an MPU-9250 with a System in Package (SiP) that combines two chips: the MPU-6500, which contains a 3-axis gyroscope as well as a 3-axis accelerometer, and the AK8963, which features a 3-axis magnetometer. This breakout has been designed to be smaller than some of our other offerings to fit in smaller projects. However, if you plan to use a breadboard, or secure the IMU board to a project with something like epoxy, the mounting holes can be easily snapped off.
To achieve its smaller size, the MPU-9250 Breakout features PTH pins that have been wrapped around the border of the PCB in three rows of three or four. The top row (J1) is all one needs to get the most functionality out of the IMU. These include the I2C and power interface. The second most likely to be used set of PTHs are found along the bottom (J3). This includes the address pin, the interrupt pin, and the IO voltage supply for easy interface with a more modern 1.8V processor. The third, a non-breadboard-compatible row (J2), is used for features like running other I2C devices as slaves to this one. For prototyping with these connections, throw your connections on top as you would with an Arduino Pro Mini or similar product.
The MPU-9250 replaces the popular EOL MPU-9150 and decreases power consumption by 44 percent. According to InvenSense, “Gyro noise performance is 3x better, and compass full-scale range is over 4x better than competitive offerings.” The MPU-9250 uses 16-bit Analog-to-Digital Converters (ADCs) for digitizing all nine axes, making it a very stable 9 Degrees of Freedom board.
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Module with 9DoF LSM9DS1 sensor (3-axis accelerometer, 3-axis magnetometer, 3-axis gyroscope). It has a derived I2C interface and is supplied with the voltage of 3.3 V. SparkFun DEV-13629
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100
No product available!
PCB printed to the modular listening receiver for the 80m and 40m Dosia bands. Power supply + 9V / + 5V. AVT3193 A
No product available!
Universal Quer power supply with a capacity of 2200mAh for charging portable electronic devices, powered by 5V. The Power bank Quer is charged via the USB port . KOM0808B
No product available!
No product available!
The UM7 orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Pololu - 2741
No product available!
No product available!
No product available!
HK ZIPPY Flightmax 5000mAh 2S1P 20C hardcase pack (14079)
No product available!
No product available!
SUPERLUMISATION MODULE 3x3LED GREEN 60mA LIGHT - KIT FOR INDEPENDENT INSTALLATION
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Pink
No product available!
Development kit with WiFi and Bluetooth module ESP-WROOM-32 and LoRa RFM95W modem. It allows you to transform LoRa radio messages into data packets that can be accessed via the Internet. SparkFun WRL-15006
No product available!
No product available!
No product available!
Assembled, remote controlled 4-channel switch. AVT5599 C
No product available!
No product available!
SEN-13762