- Out-of-Stock
Turnigy nano-tech 1800mah 3S 65~130C Lipo Pack (19120)
*
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N1800.3S.65
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Li-Po battery with a rated voltage of 3.7 V and a capacity of 4000 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP805080
No product available!
KAmodEPAPER is a module with a clear and energy-saving EPD (e-Paper) display of the GDE035A3 series. Thanks to the derived control signals and integrated in the inverter module, the display control is simple and no additional power lines are required
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
HK Fiber-Optic Lights for night flying (Red) (19568)
No product available!
No product available!
No product available!
No product available!
Flash programmer for STM8 series of flash microcontrollers with on-chip flash, Segger
No product available!
AVT kit for self-assembly of the LED thermometer - 27mm green version. AVT1697 / 2 / GB
No product available!
No product available!
What you need is an add on prototyping T-breakout board, which can break out all those tasty power, GPIO, I2C, ADC pins from the 40 pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the ODROID-C1 super easy
No product available!
Digital Design using Digilent FPGA Boards 2nd Edition, 2012; Richard E. Haskell & Darrin M. Hanna
No product available!
HK Turnigy nano-tech 1800mah 3S 65~130C Lipo Pack (19120)