.png)
- Out-of-Stock
Universal meter UT 206A
ID: 233253
Universal meter UT 206A, UNIT
Universal meter UT 206A, UNIT
UT206A clamp meter
- DC voltage measurement: 400mV - 600V in five ranges
- AC voltage measurement: 4V - 600V in four ranges
- AC current measurement: 400A - 1000A in two ranges
- Resistance measurement: 400 Ohm - 40 MOhm in six ranges
- Frequency measurement: 10Hz - 10MHz
- Temperature measurement: -40 ° C - 1000 ° C
- Basic accuracy: +/- (0.8% + 1)
- Maximum reading: 3999
- Diode testing: YES
- Acoustic continuity tester: YES
- Special functions:
- Automatic change of ranges
- Sustaining the last indication
- Sleep operation
- Display of icons
- Illuminated display
- Relative measurement
- Buzzer
- Display size: 37 x 18 mm
- Overall dimensions: 236 x 97 x 40 mm
- Weight: 350g
233253
Data sheet
- Upper DC voltage range
- 400 mV/4 V/40 V/400 V/600 V
- Upper AC voltage range
- 4 V/40 V/400 V/600 V
- Upper DC current range
- No
- Upper AC current range
- 66A /1000A
- Upper resistance range
- 400 Ω/4 kΩ/40 kΩ/400 kΩ/4 MΩ/40 MΩ
- Upper capacitance range
- No
- Frequency range
- 10Hz-10MHz
- Temperature measurement
- Yes
- Range adjustment
- Automatic
- True RMS
- No
- Hold function
- Yes
- Continuity tester
- Yes
- Diode tester
- Yes
- Transistor hFE measurement
- No
- Buzzer
- Yes
- Battery indicator
- Yes
- Automatic shut-off
- Yes
- Display backlight
- Yes
- Battery type
- 6F22
- Length
- 236 mm
- Width
- 97 mm
- Thickness
- 40 mm
- Weight
- 350 g
Manufacturer
- Lechpol Electronics Leszek Spółka komandytowa
- Garwolińska 1
- 08-400 Miętne
- Poland
- [email protected]
Responsible person
- Lechpol Electronics Leszek Spółka komandytowa
- Garwolińska 1
- 08-400 Miętne
- Poland
- [email protected]
Other products in the same category (16)
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291
Retired
No product available!
Module with a driver designed for small DC motors. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020084
Retired
No product available!
Module with a water level sensor with a measuring range of up to 10 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020635
Retired
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070024
Retired
No product available!
Module with a 3-axis H3LIS331DL accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020071
Retired
No product available!
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
Retired
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
Retired
No product available!
Audio player module with MP3 decoder and microSD card slot. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 107020069
Retired
No product available!
Module with a sensor for measuring the heart rate PAH8001EI-2G. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020082
Retired
No product available!
Module with a 12-channel capacitive touch sensor MPR121 in a set with 4 touch probes. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020047
Retired
No product available!
2.4 GHz WiFi module based on W600. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020031
Retired
No product available!
Module with 1-axis ADXL1001 accelerometer with a range up to ± 100g. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020633
Retired
No product available!
Module with a 3-axis ADXL372 accelerometer with a measuring range up to ± 200g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020632
Retired
No product available!
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Retired
No product available!
Module with a 3-axis ADXL356C accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020638
Retired
No product available!
Module with a 3-axis ADXL357 accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020639
Retired
No product available!
Universal meter UT 206A, UNIT