- Out-of-Stock
New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
12V stabilizer with 500mA protection
ID: 557551
The stabilizer module is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 12V.
Description
Electronic devices require power with a certain voltage value. The stabilizer is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 12V.
For example, a voltage stabilizer will be connected to the + 14V power supply, at its output we get + 12 V (other voltage values are also available), which can be used to power the microcontroller.
The module has a built-in protection of 500mA. If the current exceeds this value, the fuse will operate and the output will be disconnected. In this case, just disconnect the power supply to reset the protection, there is no need to replace the fuse.
Technical data
- Code and name of the MOD-06 / 12V module. 12V stabilizer with protection
- Integrated circuit: LM7812
- Protection: 500mA polymer fuse
- Power: up to + 16V
- Output voltage: + 12V
- LED signaling: yes
- Dimensions: 39 mm x 16 mm
- Additional information: built-in filter capacitors for higher load currents and a large difference between the supply voltage and the output voltage, it may be necessary to use a heat sink for heat dissipation
- RoHS: yes
Set contains
- assembled MOD-06 / 5V.Z 12V stabilizer with protection
- set of connectors for self-assembly (ARK screw connection - 2 pcs.)
557551
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Red PCB in a version without cutouts for the display and connectors. Pololu 976
Retired
No product available!
Antenna splitter that allows one GNSS antenna to be connected to two devices, such as the NEO-D9S correction data receiver and another GNSS module. The module, based on the BP2G1+ from Mini-Circuits, evenly splits the signal from the antenna port between two outputs, providing power to the active antenna and optionally switchable power supply. SparkFun SPX-21223
Retired
No product available!
No product available!
Dragino LoRa Shield is an expansion board for Arduino (Uno, Leonardo, Mega, DUE) with a LoRa communication module (RFM98W system). Works at 433 MHz, maximum power up to 100 mW. In the set with the plate there is also an antenna. Seeed studio 113990194
Retired
No product available!
Velleman VTV3 mini mini vise in red with a suction cup
Retired
No product available!
No product available!
3DR Radio is a set that allows bidirectional transmission of telemetry data, eg between the RC model (with the APM controller) and a PC. Light and small device in a set with antennas and connecting cables. Radio modules have a power of 100mW (+ 20dBm) and transmit a signal over a distance of 1km.
Retired
No product available!
George Articolo
Delivery date unknown
No product available!
No product available!
The assembled relay card programmed with sequences. AVT1998 C
Retired
No product available!
AVT kit for self-assembly of the tachometer 0-29999 rpm. AVT1870 B
Retired
No product available!
No product available!
The clamp meter is equipped with a power and harmonic measurement function. It can measure voltage, current, reactive power, power factor and phase angle. Uni-T UT243
Retired
No product available!
No product available!
A set for building an Arduino-based robot allows you to build a mobile robot to bypass obstacles and learn how to build robots. ArduCAM K0069
Retired
No product available!
No product available!
The stabilizer module is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 12V.