- Out-of-Stock
![LED logic tester LED logic tester](https://kamami.pl/23116-large_default/8-channel-led-logic-tester-2-way.jpg)
If you want to visually see what are the logic states on the pins of your microcontroller, this module allows this. In addition, you can easily and visually check the operation of operations on bits, such as bitwise shift to the left or right, sum, product etc.
The module has two rows of LEDs built-in so that the LEDs can be lit for logic "1" or "0". The last pin is the VREF reference voltage pin, if we want the LEDs to glow at the logical value of "1", we connect the last output to GND, if at the logical value "0", we connect the last pin to the "+ V" voltage.
The module pins match exactly to the prototype board. The module can be easily mounted in such a plate. The module tolerates voltage from + 3V to + 5V depending on the value of mounted resistors.
By default, the system is adapted to voltage from + 3V to + 5V. Version up to + 12V on request.
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
ABG128064H10-BIW-R Graphic display 128x64, 75x52.8mm, STN NEGATIVE BLUE, white LED backlight, extended temperature range
No product available!
JTAG interface for Texas Instruments microcontrollers (compatible with XDS100v2)
No product available!
UNIVERSAL DOOR DRIVE DRIVER - MASTER MODULE - PLATEBOARD AND PROGRAMMED SYSTEM
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
MOD-18.Z