- Out-of-Stock
zł2,051.59
zł983.72
New products
New products New products
zł124.67
Delivery date unknown
Available
Official Power Supply for Raspberry Pi 3 microUSB 5.1V/2.5A - WHITE
ID: 561340
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Description
Official Raspberry Pi power supply, ideal for use with any Raspberry Pi board. This power supply comes with 1.5m Micro USB lead and four changeable heads for use in the UK, Europe, Australia & US regions. It supports up to 2.5A of current which is plenty to power devices through the four USB ports on the board.
Features
- Designed to take full advantage of the improved power management on the Raspberry Pi 3
- Compatible with all Raspberry Pi Models
- ErP Level 6 Efficiency Rating
- Accessory Type: Power Supply
- For Use With: Raspberry Pi
- Product Range: Stontronics RPi3 Power Supply
- Power Supply Output Type: Fixed
- Output Voltage Nom.: 5.2 V
- Output Power Max: 13 W
- Plug Type: Aus, Euro, UK, US
- Input Voltage AC Min: 90 V
- SVHC: To Be Advised
- Output Current Max: 2.5 A
- Output Connector: USB Micro
- Input Voltage AC Max: 264 V
561340
Data sheet
- Cable length (m)
- 1.5m
- Supply connector
- microUSB
- Output voltage
- 5.1V
- Supply type
- network
- Output current
- 2.5A
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 92
Available
Other products in the same category (16)
Six-part plastic case with fan for Raspberry Pi 4.
Retired
No product available!
Flexiforce Pressure Sensor A401 – 10lbs, Tekscan, RoHS
Retired
No product available!
HP thermally conductive silicone paste that improves heat transfer between electronic components and the heat sink, guaranteeing their proper operation. They effectively prevent punctures and protect against weather influences. AG Termopasty ART.AGT-147
Retired
No product available!
Starter kit with STM32MP157A application microprocessor (combination of a typical processor with Cortex-A7 core and microcontroller with Cortex-M4 core). The system allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. STMicroelectronics STM32MP157A-DK1
Retired
No product available!
KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
Open4 hardware extension with MEMS 3-axis gyroscope, magnetometer, pressure and temperature sensors
Retired
No product available!
A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301
Retired
No product available!
USB port isolator used for galvanic isolation of USB connection. It uses ADI (Analog Devices iCoupler) technology. EVC9001
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1200 counts per revolution of the gearbox’s output shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.
Retired
No product available!
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV