- Out-of-Stock
zł2,051.59
zł983.72
14×4.5mm Wheel Pair for Sub-Micro Plastic Planetary Gearmotors
ID: 561640
Wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. Pololu - 2356
Motor connections
These wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. The tire is not removable.
Due to small variances in the sub-micro plastic gearmotor’s output shaft, in some instances, the 14 mm wheel might fit loosely. If you experience a loose fit, you could try swapping wheels or using a small dab of glue to help hold the wheel on.
Specifications
The wheel hub is made of ABS and the tires are natural rubber.
- Diameter: 14 mm (0.55″)
- Width of tire: 4.5 mm (0.18″)
- Weight: 0.6 g (0.02 oz)
- Shaft type: 2 mm diameter
The following diagram shows the wheel’s dimensions in mm.
561640
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. 500 RPM and 45 mA free-run, 8 oz-in (0.6 kg-cm) and 400 mA stall. Pololu 2358
zł74.11
Delivery date unknown
No product available!
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 26:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.2 g (0.042 oz), making it a great actuator for miniature robots and very small mechanisms.
Key specs at 6 V: 2500 RPM and 35 mA free-run, 1.5 oz-in (0.1 kg-cm) and 400 mA stall.
zł78.47
Delivery date unknown
No product available!
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.
zł74.50
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
Antimagnetic tweezers, sharp, made of stainless steel, resistant to most solvents and cleaning agents. 00-sa
Retired
No product available!
No product available!
No product available!
LCD display with controller CS1621 / HT1621 serial protocol, 66x26x5 mm
Retired
No product available!
Miniature starter board in the form of a USB plug compatible with Arduino (1.6.5 and newer), based on the ATtiny85 microcontroller. Up to 6 GPIO lines, up to 3 PWM lines, up to 4 ADC lines, SPI or I2C interface, and LED diode
Delivery date unknown
No product available!
32-bit microcontroller with ARM Cortex-M4 core, XMC4200 family, 256kB Flash, VQFN-48, Infineon
Retired
No product available!
0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin 10-Pack
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.37mm and an external diameter of 1.8mm.
Retired
No product available!
Universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity, temperature. Equipped with diode tester, circuit continuity test, automatic circuit breaker. Uni-T UT151C
Retired
No product available!
Wireless sensor containing a precise accelerometer and magnetometer (electronic compass) with built-in event memory (recorder)
Retired
No product available!
No product available!
No product available!
YATO 18 V drill/driver equipped with speed regulation. It has a built-in LED light, a 4-stage battery indicator and protection against overheating. It is suitable for drilling in metal and wood, as well as for driving screws. Yato YT-82782
Retired
No product available!
Miniaturized adaptation Arduino/Genuino 101 board, perfect for wearable and IoT applications, equipped with many of the same features as the 101 line with Bluetooth Low Energy (BLE) capabilities; with 6-axis accelerometer/gyroscope; can be programmed using either the Arduino IDE or Intel Curie Open Developer Kit (CODK). DEV-14281
Retired
No product available!
No product available!
Wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. Pololu - 2356