- Out-of-Stock
Raspberry Pi CM3 - Compute module 3
ID: 563760
Raspberry Pi Compute Module 3 with Broadcom BCM2837 processor clocked at 1.2GHz with 1GByte RAM and 4Gbytes of on-module eMMC flash
Description
The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processer directly and instead can concentrate on designing the interfaces to their own IO board and their application software . This simplicity fosters rapid development.
The Raspberry Pi Compute Module 3 (CM3) and Compute Module 3 Lite (CM3L) are DDR2-SODIMM-mechanically-compatible System on Modules (SoMs) containing processor, memory, eMMC Flash (CM3 only) and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra IO interfaces over and above what is available on the Raspberry Pi model A/B boards, providing more options for the designer.
Features
- Broadcom BCM2837 processor
- 1Gbyte LPDDR2 RAM
- 4Gbytes eMMC Flash
- 35u hard gold plated IO Pins
- 48x GPIO
- 2x I2C
- 2x SPI
- 2x UART
- 2x SD/SDIO
- 1x HDMI 1.3a
- 1x USB2 HOST/OTG
- 1x DPI (Parallel RGB Display)
- 1x NAND interface (SMI)
- 1x 4-lane CSI Camera Interface (up to 1Gbps per lane)
- 1x 2-lane CSI Camera Interface (up to 1Gbps per lane)
- 1x 4-lane DSI Display Interface (up to 1Gbps per lane)
- 1x 2-lane DSI Display Interface (up to 1Gbps per lane)
563760
Data sheet
- RAM
- 1 GB
- Module type
- CM3
- Wifi/Bluetooth module
- No
- eMMC storage
- 4 GB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi RPI COMPUTE MODULE module
zł154.90
Delivery date unknown
No product available!
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 41
Available
Other products in the same category (16)
The official power supply for Raspberry Pi with 5.1V output voltage and 2.5A current efficiency. Black power supply.
Retired
No product available!
Logic module LOGO! 12/24RCEO with Ethernet interface and WEB server. It has a 400-block memory and a data logging function on the microSD card, it has no display. Siemens 6ED1052-2MD08-0BA0
Retired
No product available!
1-channel touch light switch with WiFi connectivity. It allows users to remotely turn on / off connected LEDs and light from any place at any time and set time schedules using the eWeLink application. Sonoff Touch
Retired
No product available!
The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. Shelly 1 Open Source
Retired
No product available!
The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. It has the function of measuring electricity consumption and protection against overload / overheating. Shelly 1PM
Retired
No product available!
Module 4-channel opertego switch with relays with the control function via WiFi network. It has three operating modes: as an Access Point, as a local device or as a work mode in the cloud. Shelly 4Pro
Retired
No product available!
A colorful light bulb with the WiFi control function. It can be connected to a WiFi network or act as a stand-alone access point. Equipped with a brightness adjustment function, it enables control in a full range of RGB colors. Shelly Bulb Packs
Retired
No product available!
Smart socket with WiFi function. Automatically controls lighting, heating and any other connected electrical equipment. Shelly Plug
Retired
No product available!
No product available!
Complete case for ODROIDA XU4 / XU4Q - transparent (Case Clear)
Retired
No product available!
Shield with MEMS sensors: accelerometer, gyroscope, magnetometer, pressure, humidity and temperature sensor. Shield is designed to work with plates from the STM32 Nucleo family (connector in accordance with the Arduino UNO R3 standard). Sensors use I2C interface for communication. STMicroelectronics X-NUCLEO-IKS01A3
Retired
No product available!
A set of wireless keyboard and mouse working on the 2.4 GHz frequency. It can be used with minicomputers eg Raspberry Pi, BeagleBone, Odroid or Orange Pi. BLOW KM-1
Retired
No product available!
Portable set of ToF laser scanner with a range of 40m, characterized by high resolution (9,200 samples per second) and high stability and accuracy of measurements. Seeed Studio 114090021
Retired
No product available!
Expansion board with the functionality of a digital multimeter. It is a 5 1/2 digit digital multimeter, with equipment designed for use with selected Arduino boards, Digilent\'s microcontroller line. Digilent 410-356
Retired
No product available!
Board with WiFi module with ESP32 chip and OV2640 camera. The module is characterized by small size and low current in sleep mode. ESP-32CAM can be widely used in various IoT applications. ESP32-CAM
Retired
No product available!
Digital LED voltmeter 0,28 "with measuring range 0-100 V. Module powered with 3-30V voltage.
Retired
No product available!
Raspberry Pi Compute Module 3 with Broadcom BCM2837 processor clocked at 1.2GHz with 1GByte RAM and 4Gbytes of on-module eMMC flash