- Out-of-Stock
CloudShell 2 for XU4, Smoky blue
ID: 565701
Cloudshell 2 Smoky blue with 15V/4A PSU
Description
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support. Like the original CloudShell, it includes a color LCD and IR receiver on the front, but adds support for USB Attached SCSI (UAS or UASP) and useful data storage technologies (RAID-0, RAID-1 and SPAN). It offers dual slots for 3.5” HDD/SSD drives. The CloudShell-2 also includes a USB 3.0 to SATA bridge (JMicron JMS561), which supports UAS and allows installation of a dual 3.5" SATA HDD/SDD storages.
Features
- Storage:
- 2 Drive Bays
- Supported size : 3.5" SATA HDD - Supported RAID Type:
- Basic(PM)
- JBOD
- RAID 0
- RAID 1 - Appearance:
- Color: SMOKY BLUE
- Size (Height x Width x Depth): 140 x 110 x 221.5 mm
- Weight: 0.64kg(without HDD) - Others
- Fan 92 mm x 92 mm (cool and quiet modes)
- IR Receiver (remote controller not included)
- 2.8" 320x240 TFT LCD
- 15V/4A Power Supply (included)
NOTE:
3pin Power Cord is sold separately.
XU4 and HDDs are not included.
Do not apply higher than 16Volt.
CloudShell2 Assembly Video
565701
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A functional expander for NUCLEO and Arduino with a set of environmental sensors: pressure, humidity, temperature and light intensity and also a 5-position joystick and LED RGB.
Retired
No product available!
Starter kit with the Altera FPGA system from the MAX10 family, which in addition to the classic, configurable logical resources are equipped with a 12-bit ADC converter, Flash memory for the user and internal configuration memory. The set is equipped with Arduino system connectors and basic peripherals for project testing.
24h
Available quantity: 1
Magnetic Displacement Sensors, SOIC8, Honeywell Microelectronics & Precision Sensors, RoHS
Retired
No product available!
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. I-PEX connector
Delivery date unknown
No product available!
No product available!
No product available!
Quadia® Tegra® K1 SOC four-core computer supporting CUDA®, RoHS technology
Retired
No product available!
No product available!
Odroid UPS2 is a UPS designed to work with Odroid C1, C1 + and C2 computers. It is equipped with a lithium-polymer battery with a capacity of 3000 mAh
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in red
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in orange
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1m, cable in blue
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1m, cable in green
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in purple
Retired
No product available!
Flat USB cable A - micro-B USB with a length of 1 m, cable in a dark pink color
Retired
No product available!
Kinetis L Series Cortex-M0+, 32bit MCU, 256 KB Flash , QFN32, Freescale, RoHS
Retired
No product available!
Cloudshell 2 Smoky blue with 15V/4A PSU