- Out-of-Stock
TE0790 - XMOD FTDI JTAG adapter (compatible with Xilinx)
ID: 572130
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H USB2 IC. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-02
Description
TE0790 is a universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H USB2 IC. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART.
The board is equipped with a programmable CPLD system controller provided by Lattice Semiconductor LCMXO2-256HC (MachXO2 product family) to control the signals of configured interfaces. The data stream of the USB2.0 port can also be converted to 8 independent GPIOs or used as FIFO.
The EEPROM is pre-programmed and recognized by all Xilinx tools (ISE / Impact / Chipscope, Vivado Programmer / SDK).
properties
- Xmod
- Size: 20 x 25 mm
- Mounting hole M3
- FT2232H
- RX / TX channel LEDs
- Mini USB connector
- 93C56 EEPROM
- XO2-256 CPLD
- Programmable with Lattice tools
- 8 universal I / O pins
- VCCIO or 3.3 V or provided by the user (1.8 to 3.3 V)
- Red user LED
- 12 MHz clock with oscillator
- Step down DC DC inverter for USB power supply
- Green power LED
- User button
- 4-position DIP switch
- Selecting the CPLD program mode
- Disabling FTDI EEPROM
- VIO as VCC
- VCC with USB
572130
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with Xilinx Kintex-7 XC7K70T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł1,344.00
Delivery date unknown
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2CF
zł2,608.89
Delivery date unknown
No product available!
Module with Xilinx Kintex-7 XC7K160T-2C1 system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2C1
zł5,031.06
Delivery date unknown
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
Delivery date unknown
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-02-325-2CF
zł2,950.12
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
RoboClaw 2x45A Motor Controller (V5D) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 45A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3287
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC or analog inputs. This version can supply a continuous 15 A per channel (30 A peak) and operates up to 34 V.
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. This version can supply a continuous 30 A per channel (60 A peak) and operates up to 34 V.
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L YELLOW
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L YELLOW
Retired
No product available!
Pin strip straight in red, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L RED
Retired
No product available!
Adjustable USB load displaying voltage and current consumption of connected devices. The load can draw current up to 3 A. The voltage is measured in the range 3.5 ... 21V, current 0 ... 4A. It is also possible to measure cell capacity
Retired
No product available!
No product available!
Printed circuit board and programmed layout for building a comfortable direction indicator module. AVT1945 A +
Retired
No product available!
AVT kit for self-assembly of the comfortable direction indicator module. AVT1945 B
Retired
No product available!
Assembled module of comfortable direction indicators. AVT1945 C
Retired
No product available!
The camera V3 module is specifically designed for Banana Pi M3. Includes two CMOS sensor modules: OV5640 (5M Pixel) and OV8865(8M Pixel)
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L BLUE
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S L BLUE
Retired
No product available!
2x16 display with LED backlight (Yellow / Green). The height of the 9.66mm mark (BIG). ECO - low power consumption; only 30mA (including backlight), 2-LED backlight
Retired
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H USB2 IC. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-02