.png)
- Out-of-Stock
L76X GPS HAT Module for Raspberry Pi - Waveshare 16193
ID: 577919
5906623439430
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT
Description
GPS module with GNSS L76X receiver designed to work with the Raspberry Pi and Jetson Nano minicomputer. The system can receive data from the main positioning systems: GPS, BDS and QZSS. It is characterized by fast positioning, high accuracy and low energy consumption. The module has a 40-pin connector, compatible with the Raspberry Pi. The board also has a socket with an ML1220 battery that maintains voltage, which significantly accelerates the start of the device after a momentary power failure. The user can also connect an external antenna through the u.FL connector located on the board.
| 1. L76B | 7. LED |
| 2. USB-UART CP2102 | 8. 40-pin connector |
| 3. EEPROM CAT24C32 | 9. USB port |
| 4. Power manager RT9193-33 | 10. u.FL connector |
| 5. Wake-Up | 11. Battery holder |
| 6. Standby | 12. Jumpers |
The module is configured via a USB connector and a dedicated u-center application. Full documentation is available on the product Wiki page.
Features
- Integrated u.FL connector
- Receives bands L1 (1575.42Mhz), BD2 B1 (1561.098MHz)
- Accuracy 2.5 m
- Maximum update rate: 1 Hz (by default), 10 Hz (max)
- Start-up time: 15s (cold start), 1s (hot start)
- Maximum altitude: 18,000 m
- Max G: ≤4
- Maximum speed: 515 m / s
- Protocol: NMEA 0183, PMTK
- Interface: UART 4800 to 115200bps (9600 by default)
- 40-pin connector
- ML1220 battery socket
- Voltage: 3.3 / 5V
- Current consumption: 13 mA
- Dimensions: 65 x 30.5 mm
Kit contains
- L76X GPS HAT
- GPS antenna
- USB-A to Micro-B cable
- A set of screws
- 2x20-pin female connector
577919
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł339.54
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 144
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 146
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł2,328.35
24h
Available quantity: 6
Available
Other products in the same category (16)
The stabilizer module is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 9V. MOD-06 / 9V.Z
Retired
No product available!
The stabilizer module is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 12V.
Retired
No product available!
No product available!
No product available!
MT SPEC01 / 2015 RASPBERRY, ISSN 0462-9760
Delivery date unknown
No product available!
Dustyn Roberts
Delivery date unknown
No product available!
Atmel SMART SAM V71 Xplained Ultra development kit with ATSAMV71Q21 microcontroller with ARM Cortex-M7 core. ATSAMV71-XULT
Retired
No product available!
No product available!
No product available!
The module with the 74LVC245AD system allows connecting systems with different supply voltages. Bi-directional operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system. MOD-12.Z
Retired
No product available!
MOD-13.Z is a module that allows you to safely and conveniently attach a microSD card to a project with an SPI interface. It has a built-in 74HC125 buffer. MOD-13
Retired
No product available!
The SOIC adapter is used for testing circuits in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The module is equipped with a filtering capacitor and space for a polymer fuse. MOD-14.Z
Retired
No product available!
MOD-16.Z replaces the two-button regulation (more - less) with the rotary switch whose state at the given output depends on the direction of rotation. The module has a button in the encoder and a built-in Attiny13 microcontroller.
Retired
No product available!
No product available!
No product available!
The miniature digital potentiometer allows you to replace the analog potentiometer and control the resistance value using two buttons. The module contains inputs of the UP / DOWN buttons (for increasing and decreasing the resistance) and outputs in accordance with the analog potentiometer A, W, B (description on the circuit board). MOD-19.Z
Retired
No product available!
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT