- Out-of-Stock
The cable is designed for connections at distribution points and subscriber outlet connections to active devices such as a switch, router or directly to the computer's network card. Patchcords are used in connections of passive and active devices in LAN, Ethernet, xDSL and telephone networks - at home, office and industry. Made in accordance with the applicable standards, subjected to repeated tests and verification ensure the highest transmission parameters and compliance with the given category.
They meet the following product and application standards: PN-EN 41003: 2001, PN-EN 50173: 2004, ISO / IEC 11801: 2002, ANSI / TIA / EIA-568-B.2-1, PN-EN 60-603-7 -1: 2002 (U).
Manufacturer
Responsible person
Tester for testing cables with RJ45 and RJ11 plugs. Detects abnormalities such as short circuits, openings, reversed wires, swapped pairs. NAR0167
Crimping tool for 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11), 6P2C plugs with a clipper. NAR0008
Connector pliers for 8-pin, 6-pin, 4-pin connectors, incl. 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11), 4P4C, 4P2C PLUGS, DEC / OFF SET PLUG-6P6C, equipped with 2 knives. NAR0051
No product available!
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.51mm and an external diameter of 0.82mm
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.9mm and an external diameter of 1.2mm
No product available!
Dispensing needle bent, for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.5 mm
No product available!
Folded bending needle, for precise glue application, flux with 0.51mm internal diameter and 0.8mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
No product available!
The tape is used for shielding electronic devices and discharging electrostatic charges, self-adhesive, 25mm x 30m
No product available!
The aluminum tape, 40m long and 1cm wide, is used to protect components when soldering with hot air or infrared
No product available!
Thermopad, two-side thermo-adhesive tape, 20mm x 130mm x 1mm, 6W / mK, AG Thermopiles, RoHS
No product available!
Thermopad, double-sided adhesive, 20mm x 130mm x 2mm, 2.4W / mK, AG Thermopanes, RoHS
No product available!
Thermopad, thermo-adhesive tape, double-sided adhesive 20mm x 130mm x 1mm, 2.4W / mK, AG Thermopiles, RoHS
No product available!
Display with 7 "TFT LCD touch screen for Odroid C0, C1, C1 +, C2, Xu3 and XU4 computers The display has an HDMI interface for displaying images and USB for a touch screen resolution 1024x600 pixels
No product available!
Xprotolab Plain is an Oscilloscope, Logic Analyzer, Waveform & Clock generator all in one tiny, light weight and low cost package which are fully compatible with ODROID-C1/C2/XU4 Linux platforms
No product available!
AG chemical preparation, sodium persulfate for the etching of printed circuit boards. It dissolves very quickly and does not crystallize out of the solution. Purse 100g
No product available!
A liquid for cleaning printed circuit boards based on isopropyl alcohol, perfectly removes binder residues, as well as lubricants and oils. MICROCHIP
No product available!
Tape, in the form of a braid, to remove the excess of molten solder brazing material during soldering and desoldering of electronic components 1.5m
No product available!
Patchcord UTP 5E Ethernet cable with a length of 2 m - blue, with 2xRJ45 connectors