- Out-of-Stock
Akyga Li-Po battery 3.7V / 600mAh 1.25 Molex connector
ID: 574180
Li-Po battery 3.7V / 600mAh, PCM + NTC protection, 1.25 Molex connector, 3 pins, cable length 35mm
Description
Akyga lithium-polymer battery with 3.7 V and 600 mAh capacity with MOLEX 1.25 mm connector and PCM + NTC protection. The product can be used to power small electronic systems or robots. Very easy to install, thanks to the lead in the form of wires and a special connector.
properties
- Battery type: Li-Po
- Voltage: 3.7 V
- Capacity: 600 mAh
- Connector pitch: 1.25 mm
- Outputs: Molex connector 1.25 mm
- Protection: PCM + NTC
- Nominal current charge / discharge: 0.2C / 0.2 C
- Maximum current charging / discharging: 1C / 2C
- Cable length: 35 mm
- Working temperature: -20 ... + 60 ° C
- Dimensions: 41 x 24 x 6.5 mm
- Weight: 12.3 g
574180
Manufacturer AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Responsible person AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
You might also like
Li-Po battery 3.7V / 850mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP603048
zł23.69
Delivery date unknown
No product available!
Li-Po battery 3.7V / 980mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP573450
zł24.28
24h
Available quantity: 7
Available
Other products in the same category (16)
No product available!
No product available!
No product available!
No product available!
No product available!
Generic Linear Actuator: 4" Stroke, 12V, 1.5"/s
Retired
No product available!
Module with driver for 64x32 or 32x16 LED matrix displays. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 105020013
Retired
No product available!
Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS IMX291 sensor with an ultra-wide 160° lens, two microphones, housing and a tripod. ArduCAM UB020202
Retired
No product available!
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. Pivariety adapter included. ArduCAM B0348
Retired
No product available!
Qing Li, Jinmei Tatuya, Keiichi Shima
Delivery date unknown
No product available!
No product available!
No product available!
Shield for MAXimator set, 4-digit 7-segment LED display, 2 RGB type WS2812B diodes, STLM20 temperature sensor, two buttons
Retired
No product available!
No product available!
Small, white-on-black OLED 128x32 monochrome display designed for Teensy development board, controlled with the popular SSD1306 IC. SparkFun LCD-14048
Retired
No product available!
Li-Po battery 3.7V / 600mAh, PCM + NTC protection, 1.25 Molex connector, 3 pins, cable length 35mm