- Out-of-Stock
NXP PN7150 - NFC set for Raspberry Pi
ID: 575516
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Description
PN7150RPI is a NFC-compatible Raspberry Pi expansion kit. It has the ability to work in reader mode, P2P
and card emulation mode. The kit includes an integrated high-performance radio antenna, ensuring cooperation with NFC devices.
Features
- Controller type: NFC
- Compatible with Raspberry Pi minicomputers
- Support for Linux and Windows IoT systems
- Integrated high quality antenna
- Compatible with 3 NFC modes: reader mode, P2P and card emulation
- Maximum working range: 50 mm
Included
- NFC PN7150S controller board
- Raspberry Pi OM29110RPI interface board
- NFC test card
575516
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360
zł12.94
24h
Available quantity: 4
Available
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3
Regular pricezł29.93zł18.91
24h
Available quantity: 208
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 31
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł163.90
24h
Available quantity: 9
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
24h
Available quantity: 70
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Regular pricezł340.57zł338.00
Delivery date unknown
No product available!
Other products in the same category (16)
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
3DR Radio is a set that allows bidirectional transmission of telemetry data, eg between the RC model (with the APM controller) and a PC. Light and small device in a set with antennas and connecting cables. Radio modules have a power of 100mW (+ 20dBm) and transmit a signal over a distance of 1km.
Retired
No product available!
A small USB splitter allowing to connect up to 4 USB devices, powered from the USB port
Retired
No product available!
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! PJRC TEENSY32
Retired
No product available!
No product available!
This is the Teensy Audio board add-on for the Teensy 3.x line development boards. This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy project. PJRC TEENSY3-AUDIO
Retired
No product available!
No product available!
No product available!
No product available!
AVT kit for self-assembly of the USB-1-Wire converter. AVT1787 B
Retired
No product available!
No product available!
PCB for MKP - control and measurement module with USB interface. AVT5425 A
Retired
No product available!
AVT kit for self-assembly MKP - measuring and control module with USB interface. AVT5425 B
Retired
No product available!
Assembled MKP kit - control and measurement module with USB interface. AVT5425 C
Retired
No product available!
Printed circuit board for mounting running lights. AVT795 A
Retired
No product available!
AVT kit for self-assembly running lights. AVT795 B
Retired
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150