- Out-of-Stock
Intel Edison Breakout Board Kit
ID: 560761
A set containing the Intel Edison platform and a dedicated development board that allows you to output GPIO ports and 2 USB (micro AB) sockets, connect power 7..15V and turn off the system using the button. EDI2BB.AL.K
Description
The Intel Edison Breakout Board Kit is a set consisting of a powerful Intel Edison computing platform and a dedicated microcomputer development board with Micro-USB ports type A and type B, enabling the output of GPIO ports and power connection from 7 to 15V. The Intel Edison platform is based on a dual-core Intel Atom processor made in the 22nm process and has embedded Bluetooth LE module, Wi-Fi. The development board included in the set allows for communication with the microcomputer via USB ports using the built-in UART-USB converter. There is a power switch on the board that allows you to turn off the device or to go into a low power state. 40 GPIO pins from the 70-pin connector were led out on the board, which allows connecting external modules to the microcomputer and communication via serial interfaces, among others I2C, UART, SPI.
properties
- Intel Edison platform
- Intel Atom 500 MHz dual-core processor (22nm process)
- Processor connector: Hirose DF40, 70 pins 0.4mm
- Intel Quark 100 Mhz microcontroller
- Operating memory: 1 GB LPDDR (2x32bit)
- Maximum memory capacity: 4 GB eMMC
- Wi-Fi module (2.4 / 5GHz): 802.11a, 802.11g, 802.11b, 802.11n
- Bluetooth 4.0 module
- Support for systems: Yocto Linux, Arduino, Python, Node.js
- Power supply: 7..15V
- Dimensions: 35.5 x 25 x 3.9mm
- Intel Edison Breakout Board
- Interfaces: Arduino Headers, Hirose DF40, I2C, ICSP, microUSB Device, SD Card, UART
- Processor connector: Hirose DF40, 70 pins 0.4mm
- GPIO 1.8V outlets
- Micro USB port connected to the integrated USB-UART converter
- Power switch
- Supply voltage: 7..15V
- Dimensions: 61 x 29 x 12mm
Included
- Intel Edison Breakout Board
- Intel Edison platform
To download
- Website of the Intel manufacturer
- A brief instruction manual
- Article on "Intel Edison - a computer with the size of an SD card" in the Mikrokontroler.pl portal
- Catalog information
- Presentation of the Intel Edison platform
- Documentation of the Intel Edison platform
- Intel Edison Wi-Fi documentation
- Intel Edison Bluetooth documentation
- Intel Edison BSP documentation
- Documentation of the Intel Breakout Board
- Diagrams of the Intel Breakout Board
560761
Other products in the same category (16)
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
Retired
No product available!
No product available!
Male terminal block, angled, 6-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
No product available!
No product available!
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
Retired
No product available!
No product available!
No product available!
Switch-mode power supply (constant voltage) with an output voltage of 12 V and a maximum current of 1.5 A. The cable terminated with a DC 5.5x2.5 plug
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
A set containing the Intel Edison platform and a dedicated development board that allows you to output GPIO ports and 2 USB (micro AB) sockets, connect power 7..15V and turn off the system using the button. EDI2BB.AL.K