- Out-of-Stock
Banana Pi BPI-R64 - Development kit with MediaTek MT7622 chip and 1GB RAM/8GB eMMC
ID: 579344
Development kit based on MediaTek MT7622 chip with 64-bit ARM Cortex-A53 dual-core processor. It is equipped with 1GB SDRAM, 8GB eMMC memory and numerous connectors and interfaces such as SATA, Ethernet, microSD socket and USB 3.0 Host. The kit creates a router that can run on various open source operating systems, including OpenWrt and Linux. Banana Pi BPI-R64
Description
Banana Pi R64 is a development kit based on the MediaTek MT7622 chip with a 64-bit ARM Cortex-A53 dual-core processor. It is equipped with 1 GB SDRAM, 8 GB eMMC memory and numerous connectors and interfaces such as SATA, Ethernet, microSD socket and USB 3.0 Host.
The kit creates a router that can run on various open source operating systems, including OpenWrt and Linux. It has 4 Gigabit LAN ports, 1 Gigabit WAN and AC WiFi AP function. The set can be attached using, among others PCIe2.0 connectors additional modules such as WiFi WiFi BPI-MT7615 or 4G module. The board has support for power supply via PoE modules.
The MediaTek MT7622 system is an integrated WFi 4x4 802.11n and Bluetooth 5.0 platform with a dedicated network accelerator. It has been designed for network devices including routers/repeaters, home automation gateways, wireless sound or mass storage. The versatile chipset provides a platform for popular dual-band and tri-band 4X4 routers / repeaters. The necessary audio interfaces, such as I2S, TDM and S/PDIF, have been added to the sound and voice control application, while for home automation gates there is a wide range of communication interfaces like Wi-Fi, Bluetooth and Zigbee.
The manufacturer provides extensive support for the set in the form of Wiki documentation and instructions on how to start working with the set.
Features
- MediaTek MT7622 processor, 1.35GHZ 64-bit dual-core ARM Cortex-A53
- SDRAM 1 GB DDR3
- 8 GB eMMC
- SATA interface
- GPIO 40 pin connector, 28 × GPIO, UART interfaces, I2C, SPI, PWM, I2S
- 5 x Ethernet 5 10/100/1000 Mb / s
- 4x4n 802.11n Wi-Fi module (800 Mb/s)
- Bluetooth 5.0 module
- MicroSD memory slot
- Mini PCIE interface for 4G
- USB 3.0 host
- Reset buttons
- Power diodes and RJ45 diode
- IR defined using GPIO
- DC 12V/2A power supply with DC input
- POE module support
- Dimensions: 148 × 100.5 mm
- Weight: 100 g
579344
You might also like
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - blue, with 2xRJ45 connectors
zł4.61
24h
Available quantity: 11
Available
Patchcord UTP 5E Ethernet cable with a length of 10 m - gray, with 2xRJ45 connectors
Regular pricezł16.30zł14.90
24h
Available quantity: 1
Available
Switched-mode AC Power supply 12V/2A with DC 5.5x2.1 connector and EU plug. It has anti-overload, anti-overvoltage, short circuit protection. Conform to the norm Energy efficiency Level V. Length of output cable is 1.2m
zł43.90
24h
Available quantity: 12
Available
Ethernet patch cord UTP 5E, 2 m long. Red color, with RJ45 connectors. Lanberg Z22990
zł3.00
24h
Available quantity: 21
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-BK
zł3.00
24h
Available quantity: 9
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0300-S
zł3.60
24h
Available quantity: 9
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0500-S
zł5.20
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
Retired
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
Retired
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
Retired
No product available!
UPS uninterruptible power supply module for Raspberry Pi, allowing the microcomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. SB Components UPS HAT
Retired
No product available!
SimpleFOC brushless motor driver module dedicated to Arduino boards. SimpleFOC Shield v2.0.4
Retired
No product available!
630 kV brushless DC motor. Powered by 2S to 4S packages, dedicated to drones, airplanes and camera stabilizers
Retired
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°, no IR filter. ArduCAM B006604N
Retired
No product available!
Laser scanner using ToF technology. It performs measurements with a frequency of 5 to 13 turns per second and has a range of up to 12 m. Waveshare DTOF LIDAR LD19
Retired
No product available!
The base plate is dedicated to the STM32F429I-DISCO set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open429Z-D Standard
Retired
No product available!
The board with the microcontroller STM32F405RGT6 in the set with the base board and expansion modules. Waveshare Open405R-C Package B
Retired
No product available!
Development board with STM8S208MB microcontroller. It is equipped with numerous connectors, buttons and a joystick, thanks to which it can be used for prototyping devices. Waveshare Open8S208Q80 Standard
Retired
No product available!
Base plate dedicated to the STM32F4DISCOVERY set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open407V-D Standard
Retired
No product available!
Wireless communication module based on the NRF24L01 chip. Equipped with an angular connector, it will be perfect for the construction of small devices. Waveshare NRF24L01 RF Board (B)
Retired
No product available!
FRAM FM24CLXX memory module. It communicates via the I2C interface. Waveshare FM24CLXX FRAM Board
Retired
No product available!
1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. Waveshare 7inch HDMI LCD (C) rev3.1
Retired
No product available!
Development kit based on MediaTek MT7622 chip with 64-bit ARM Cortex-A53 dual-core processor. It is equipped with 1GB SDRAM, 8GB eMMC memory and numerous connectors and interfaces such as SATA, Ethernet, microSD socket and USB 3.0 Host. The kit creates a router that can run on various open source operating systems, including OpenWrt and Linux. Banana Pi BPI-R64