- Out-of-Stock
Banana Pi BPI-M4 - minicomputer with Realtek RTD1395 quad-core processor, WiFi, BT 4.2 and 1GB RAM
ID: 582186
Minicomputer with Realtek RTD1395 ARM Cortex-A53 quad-core processor, Mali 470 MP4 GPU graphics card, 1 GB RAM, 8 GB eMMC, WiFi, BT 4.2 and numerous connectors. Banana Pi BPI-M4
Description
Banana Pi BPI-M4 is a minicomputer with a Realtek RTD1395 ARM Cortex-A53 64-bit quad-core processor and a Mali 470 MP4 GPU graphics card. It is equipped with 1 GB of RAM, built-in eMMC memory with a capacity of 8 GB and a microSD card slot. BPI-M4 has numerous connectors: Ethernet, 4 x USB type A, USB type C, HDMI, 3.5 mm audio jack and M.2 connector and 40-pin connector with interfaces such as UART, I2C, SPI or outputs PWM. The minicomputer is also equipped with the RTL8821 chip, which provides WiFi wireless communication and Bluetooth 4.2.
The minicomputer is powered by the USB type C connector (recommended 5V/2A power supply) or by the PoE connector. It can work under the control of Android or Linux. The manufacturer offers extensive support for users in the form of quick start instructions and Wiki documentation.
Features
- CPU Realtek RTD1395 ARM Cortex-A53 Quad-Core 64 Bit
- GPU Mali 470 MP4 GPU OpenGL ES 1.1/2.0
- Memory 1 GB DDR4 (option 2 GB)
- Storage MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB
- Network 10/100 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2
- Video Output(s) HDMI port and multi-channel audio output support 1080P H.264 H.265 2K/4K
- Audio Output(s) 3.5mm jack and HDMI
- PCIE M.2 Key E slot PCIE 2.0 and USB 2.0
- USB ports USB 2.0 PORT (x4), USB 2.0 TYPE C(x1)
- GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM
- Switches Reset, Power and U-boot
- LED Power Status and Activity status
- Power Source 5 volt @2A via Micro USB (TYPE C) or PoE support
- Size & Weight 92x60mm, 48g
- OS Android and Linux
582186
You might also like
Power adapter for Raspberry Pi 5V / 2,5A from Akyga with microUSB connector. Made of high quality material. It has protection against overcharging and overvoltage. The cable length is 1.5 m.
zł36.53
24h
Available quantity: 9
Available
GOODRAM MicroSDHC 128GB Class 10 memory card
zł72.37
24h
Available quantity: 17
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 25
Available
Ethernet patch cord UTP 5E, 2 m long. Red color, with RJ45 connectors. Lanberg Z22990
zł3.00
24h
Available quantity: 21
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-B
zł2.76
24h
Available quantity: 20
Available
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0300-S
zł3.60
24h
Available quantity: 9
Available
SanDisk Extreme microSDXC 64GB V30 Memory Card. Designed for intensive use in harsh conditions, perfect for video monitoring, drones, action cameras, professional cameras, and telemetry systems, offering fast data writing speeds of up to 90 MB/s
zł60.76
24h
Available quantity: 6
Available
The Natec Prati cable, 100 cm in length, enables fast charging and data synchronization between USB-C and USB-A devices. With Quick Charge 3.0 support, it provides charging speeds up to 4 times faster than standard solutions, while the nylon braid and metal connectors ensure durability and flexibility in any situation. Natec NKA-1957
zł10.79
24h
Available quantity: 3
Available
Other products in the same category (16)
Dragino LoRa Shield is an expansion board for Arduino (Uno, Leonardo, Mega, DUE) with a LoRa communication module (RFM98W system). Works at 433 MHz, maximum power up to 100 mW. In the set with the plate there is also an antenna. Seeed studio 113990194
Retired
No product available!
Module with color sensor TCS34725FN. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020341
Retired
No product available!
Module with GPS receiver (SIM28). The system allows you to track up to 22 satellites. The UART interface is used for communication with the system. The module has a connector in accordance with the Grove standard. Seeed Studio 113020003
Retired
No product available!
HSET06 PEREL Precision screwdriver set 6 pcs by VELLEMAN
Retired
No product available!
Card Kingston 32GB microSDHC Class 10 U3 UHS-I 90R / 80W + SD Adapter. Kingston SDCA3 / 32GB
Retired
No product available!
SanDisk Ultra microSDHC memory card with 32GB capacity, maximum reading speed up to 80 MB / s, Class 10 UHS-I
Retired
No product available!
No product available!
No product available!
The tape is used for shielding electronic devices and discharging electrostatic charges, self-adhesive, 50mm x 30m
Retired
No product available!
7\'\' Powertip LCD-TFT 800x480 px display with touch-panel, LED backlight, DC/DC converters, compatible with SoMLabs VisionSTK-xx and VisionCB base boards. SL-TFT7-TP-800-480
Retired
No product available!
RGB LED matrix display with a resolution of 32 x 32 (1024 LED). DFRobot DFR0472
Retired
No product available!
RGB LED matrix display with a resolution of 64 x 64 (4096 LED). DFRobot DFR0499
Retired
No product available!
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on CR95HF / ST25R95-VMD5T to enable expansion of the STM32 Nucleo boards
Retired
No product available!
Electronic educational kit for beginners EXTENDED by CD with PKE course, contact pads power supply and 1.4A plug-in power supply
Retired
No product available!
Printed circuit board and programmed circuit for universal time relay with SKEDD connector. AVT5610 A +
Retired
No product available!
AVT kit for self-assembly of universal time relay with SKEDD connector. AVT5610 B
Retired
No product available!
Minicomputer with Realtek RTD1395 ARM Cortex-A53 quad-core processor, Mali 470 MP4 GPU graphics card, 1 GB RAM, 8 GB eMMC, WiFi, BT 4.2 and numerous connectors. Banana Pi BPI-M4