- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
IMX219-83 8MP 3D Stereo Camera - IMX219 8MP Stereo Camera Module for Jetson Nano and Xavier NX
ID: 583418
3D stereo camera module, which was built of two cameras with Sony IMX219 sensor and IMU ICM20948 sensor. Designed to work with Jetson Nano and Xavier NX. Seeed Studio 114992270
Description
3D stereo camera module, which was built of two cameras with Sony IMX219 sensor and IMU ICM20948 sensor, which combines an accelerometer, gyroscope and magnetometer. The sensor used has a matrix with a resolution of 8 MP and a wide viewing angle of 83°. The module is attached to the evaluation kit via dedicated sockets and uses a CSI interface specially developed for cooperation with cameras. The IMU system is controlled via the I2C interface and the Grove connector. The kit is designed to work with the Jetson Nano and Xavier NX development kits and allows you to implement AI vision applications such as deep vision and stereo vision. Full documentation with examples of use is available on the product page.
Features
- Matrix: Sony IMX219
- Resolution: 8 MPx
- Number of pixels: 3280 x 2464
- Matrix format: 1/4 inch
- Viewing angle: 83°/73°/50°
- Focal length: 2.6 mm
- Distortion: <1%
- ICM20948:
- Accelerometer:
- Resolution: 16-bit
- Measurement range: ±2, ±4, ±8, ±16g
- Current consumption: 68.9 uA
- Gyroscope:
- Resolution: 16-bit
- Measurement range: ±250, ±500, ±1000, ±2000°/sec
- Current consumption: 1.23 mA
- Magnetometer:
- Resolution: 16-bit
- Measurement range: ± 4900μT
- Current consumption: 90 uA
- Dimensions: 24 x 85 mm
Kit contains
- IMX219-83 8MP 3D Stereo Camera module
- FFC cable
- Grove cable
583418
Data sheet
- Resolution
- 8MPx
- Interface
- CSI
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- none
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
NVIDIA module with the NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 cores supporting CUDA technology and 48 Tensor cores. The system is supported by DDR4 RAM with a capacity of 8 GB, DisplayPort interface, HDMI, USB 3.1, PCIe and MIPI-CSI cameras 900-83668-0000-000.
zł3,528.54
Delivery date unknown
No product available!
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł2,899.00
24h
Available quantity: 6
Available
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł3,299.00
24h
Available quantity: 42
Available
Other products in the same category (16)
PCB for an economic logarithmic probe. AVT1962 A
Retired
No product available!
PCB with programmed system for thermometer with thermocouple and alarm. AVT1960 A +
Retired
No product available!
AVT kit for self-assembly of a thermometer with thermocouple and alarm. AVT1960 B
Retired
No product available!
Assembled thermometer with thermocouple and alarm. AVT1960 C
Retired
No product available!
Flash memory with QSPI interface, capacity 8 Mb (1MB), operating at 104 MHz. SOIC8 case, operating temperature -40 ° C ~ 85 ° C, manufacturer Winbond
Retired
No product available!
NUCLEO-L496ZG - STM32 Nucleo-144 development board with STM32L496ZG MCU, supports Arduino, ST Zio...
The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller
Retired
No product available!
The X-NUCLEO-NFC05A1 is an NFC card reader expansion board based on the ST25R3911B. The expansion board is configured to support ISO14443A/B, ISO15693, FeliCa™ and AP2P communication
Retired
No product available!
The X-NUCLEO-OUT01A1 is an Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo boards. It provides an affordable and easy-to-use solution involving galvanic insulation embedded in industrial power switch driver applications
Retired
No product available!
Digital ECHO effect for use in audio systems. MK182
Retired
No product available!
Guardian of a 12V car battery. MK189
Retired
No product available!
No product available!
Printed circuit board and programmed circuit for event counter. AVT3188 A +
Retired
No product available!
AVT kit for self-assembly of the event counter. AVT3188 B
Retired
No product available!
No product available!
No product available!
Gravity: UART A6 GSM & GPRS Module is a board with a GSM / GPRS module powered by 5V. It allows sending text messages, making voice calls and transmitting data. DFRobot TEL0113
Retired
No product available!
3D stereo camera module, which was built of two cameras with Sony IMX219 sensor and IMU ICM20948 sensor. Designed to work with Jetson Nano and Xavier NX. Seeed Studio 114992270