- Out-of-Stock
pHAT Stack - pin expander for Raspberry Pi (assembled)
ID: 585215
606034876361
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM322
Description
A pin expander designed for Raspberry Pi boards. It is equipped with a standard output for connecting the Raspberry Pi with a tape and five sets of 2x20 pins that allow you to connect additional expansion modules, such as displays, modules with sensors or audio modules. Pin labels on the top of the board and online configurator make prototyping much easier. A guide with application examples is available on the product page.
Features
- Standard Raspberry Pi 40-pin connector
- 5x set of 2x20 connectors
- Labels describing the pins on the front
- Mounting holes M2.5
Kit contains
- PCB pHAT Stack with soldered connectors
- 5 pairs of black brass spacers
- 4 x rubber non-slip feet
- 40 pin black cable
585215
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
24h
Available quantity: 27
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
24h
Available quantity: 28
Available
Other products in the same category (16)
Orange Pi R1 H2 Quad Core Cortex-A7 Open Source 256MB DDR3 Development Board Mini PC
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
6x1 F-F 24" Cable for ShiftBrites and ShiftBars
Retired
No product available!
CraftBot FLOW 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners
Retired
No product available!
Generic Linear Actuator with Feedback: 4" Stroke, 12V, 0.6"/s
Retired
No product available!
Brushless motor Turnigy D2836 / 11 750 kV Outdoor (HK12922)
Retired
No product available!
No product available!
ZL9ARM - base plate for dipARM modules with LPC213x and LPC214x microcontrollers
Delivery date unknown
No product available!
No product available!
Expansion module for NanoPi Duo2, equipped with an Ethernet port, serial port, audio and USB. It has a built-in quad-band SIM800C GSM / GPRS module. FriendlyELEC NanoPi Duo2 IoT-2G
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 8 pins with 2.54 mm pitch are available with soldered gold pins, 3 GPIO lines, reset, power supply and UART interface on the connector. U.FL. Antenna Connector 3.3 V power supply
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM322