- Out-of-Stock

1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Data sheet
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Easy PET-G filament in blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Blue
Easy PET-G filament in graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Graphite
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
An advanced 3D printer that offers unique multi-color printing capabilities thanks to the Automatic Material System (AMS). It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon Combo
No product available!
No product available!
Development kit for Xilinx Spartan 3 FPGA systems
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Assembled automatic power switch for car installation. AVT1877 C
No product available!
The assembled relay card programmed with sequences. AVT1998 C
No product available!
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
No product available!
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
No product available!
No product available!
HK Turnigy TrackStar 10.5T Sensored Brushless Motor 3250KV (23361)
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Orange