- Out-of-Stock
Filament ROSA3D PLA Starter 1.75mm Blue
ID: 587793
5907753130402
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Blue
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: Blue
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
587793
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Blue
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
24h
Available quantity: 80
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł46.60
24h
Available quantity: 66
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 121
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
No product available!
Module with e-Paper display, diagonal 7.5" and resolution 640x384 px. Communication via SPI interface. Waveshare 7.5inch e-Paper HAT (C)
Retired
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
24h
Available quantity: 20
A set of PCBs with a programmed layout for the LED thermometer - version 27mm green. AVT1697 / 2 / G A +
Retired
No product available!
No product available!
No product available!
Agnieszka Chodorek, Robert R. Chodorek, Andrzej R. Pach
Delivery date unknown
No product available!
No product available!
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
AGG128064G01-YIY-R Graphic LCD Display 128x64, STN, POSITIVE, LED backlight (Yellow / Green), PCB 93x70mm, RoHS
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
Display board for the STM32F407G-DISC1 set. Built-in display with a resistive touch panel, has. The set includes a flexible cable that allows you to attach to the expansion board STM32F4DIS-BB
Retired
No product available!
Camera module with Sony Starvis IMX327 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a motorized IR-CUT filter. ArduCAM B0425
Retired
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 200 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2202C
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Blue