- Out-of-Stock
zł971.80
Filament ROSA3D PET-G Standard 1.75mm Red Transparent
ID: 587822
5907753130204
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Red Transparent
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The filament is made of raw materials that are approved for contact with food. It is dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Features
- Color: Red Transparent
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density 1.29 g/cm3
- Odorless smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 0.8 kg
587822
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Red
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Blue
zł75.01
24h
Available quantity: 1
Available
Easy PET-G filament in light green transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Light Green Transparent
zł75.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 16
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
Other products in the same category (16)
The expansion board is designed to work with Alchitry Au and Alchitry Cu. The board has four 7-segment LED displays, five buttons, 24 LEDs and 24 DIP switches. SparkFun DEV-17278
Retired
No product available!
Minicomputer with Amlogic S922X processor, which integrates the ARM Cortex-A73 quad-core chip and Cortex-A53 dual-core with Mali-G52 GPU and 4GB of RAM. Additional equipment includes: eMMC memory slot, HDMI, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2L
Retired
No product available!
Minicomputer with Amlogic S922X processor, which integrates the ARM Cortex-A73 quad-core chip and Cortex-A53 dual-core with Mali-G52 GPU and 2GB of RAM. Additional equipment includes: eMMC memory slot, HDMI, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2L
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 8GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 16GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 16GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 64GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 64GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 128GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 128GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 8GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 16GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 16GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 64GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 64GB eMMC Module N2L Android
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 128GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 128GB eMMC Module N2L Android
Retired
No product available!
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 50 W
Retired
No product available!
SpaceSOM series module with NXP i.MX8M plus 1.8 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1800C_02GR_08GE_0SF_C
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Retired
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
Retired
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Red Transparent